FreeCalypso > hg > fc-tourmaline
view src/gpf/ccd/critical_ext.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 13 Nov 2021 03:20:57 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: critical_ext.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG. | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +------------------------------------------------------------------------------ | Purpose: Encoding and decoding functions for criticalExtensions | | $Identity:$ +------------------------------------------------------------------------------ */ /* * Standard definitions like UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes and constants in the common part of ccd */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : critical_ext | | STATE : code ROUTINE : cdc_critical_ext_decode | +------------------------------------------------------------------------+ PURPOSE : Decode elements of type criticalExtensions An element of this type should never be encoded or decoded. If the coder faces an IE of this type, it should report an error report and abort. Whenever a criticalExtensions-IE is extended from NULL or SEQUENCE {} to another type, its CCD coding type will change and the functions in this file will not be called for that IE any more. According to 3GPP TS25.331 V3.6.0, 10.1.1.2.2: Since messages including critical extensions are rejected by receivers not comprehending them, these messages can be modified completely, e.g. IEs may be inserted at any place and IEs may be removed or redefined. See also 3GPP TS25.921 V4.3.0, 10.4. */ SHORT cdc_critical_ext_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_critical_ext_decode()"); #else TRACE_CCD (globs, "cdc_critical_ext_decode() %s", mcomp[melem[e_ref].elemRef].name); #endif #endif globs->pstructOffs = melem[e_ref].structOffs; /* For optional elements we have already set the valid flag in the * C-structure. We have done it while processing ASN1_SEQ. */ if ( ! cdc_isPresent(e_ref, globs) ) { return 1; } if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0) { ccd_recordFault (globs, ERR_CRITICAL_EXT, BREAK, (USHORT) e_ref, globs->pstruct + melem[e_ref].structOffs ); return 0; } /* * Currently CCD tool chain does not support extensions of this type. * This else-implementation is just an outlook. * else { U16 compRef = melem[e_ref].elemRef; U16 elemRef = mcomp[compRef].componentRef; (void) codec[melem[Elem].codingType][DECODE_FUN] (compRef, elemRef, globs); }*/ return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : critical_ext | | STATE : code ROUTINE : cdc_critical_ext_encode | +------------------------------------------------------------------------+ PURPOSE : Encode elements of type criticalExtensions An element of this type should never be encoded or decoded. If the coder faces an IE of this type, it should report an error report and abort. */ SHORT cdc_critical_ext_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_critical_ext_encode()"); #else TRACE_CCD (globs, "cdc_critical_ext_encode() %s", mcomp[melem[e_ref].elemRef].name); #endif #endif globs->pstructOffs = melem[e_ref].structOffs; /* For optional elements we have already set the valid flag in the * C-structure. We have done it while processing ASN1_SEQ. */ if ( ! cdc_isPresent(e_ref, globs) ) { return 1; } if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0) { ccd_recordFault (globs, ERR_CRITICAL_EXT, BREAK, (USHORT) e_ref, globs->pstruct + melem[e_ref].structOffs ); return 0; } /* * Currently CCD tool chain does not support extensions of this type. * This else-implementation is just an outlook. * else { U16 compRef = melem[e_ref].elemRef; U16 elemRef = mcomp[compRef].componentRef; (void) codec[melem[Elem].codingType][ENCODE_FUN] (compRef, elemRef, globs); }*/ return 1; } #endif /* !RUN_INT_RAM */
