FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/tcpip/include/rvm_priorities.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 13 Nov 2021 03:20:57 +0000 |
| parents | fa8dc04885d8 |
| children |
line wrap: on
line source
/**************************************************************************** * * * Name rvm_priorities.h * * * * Function this file priorities defintitions for basic SWEs * * It includes a file rvm_ext_priorities.h where are defined * * "custom" priorities. * * * * Version 0.1 * * * * Date Modification * * ------------------------------------ * * 10/11/2000 Create * * * * Author Cristian Livadiotti (c-livadiotti@ti.com) * * * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved* ****************************************************************************/ #ifndef __RVM_PRIORITIES_H_ #define __RVM_PRIORITIES_H_ #include "rvm_ext_priorities.h" /* PRIORITIES SETTING: */ /* All user priority should be set under 250: */ /* Higher values are reserved */ /* ** Bluetooth Priorities: ** All set to same value, except ATP (not a task) and HCI (valid on PC only) */ #define RVM_HCI_TASK_PRIORITY (250) #define RVM_L2CAP_TASK_PRIORITY (240) #define RVM_BTCTRL_TASK_PRIORITY (240) #define RVM_RFCOMM_TASK_PRIORITY (240) #define RVM_SPP_TASK_PRIORITY (240) #define RVM_SDP_TASK_PRIORITY (240) #define RVM_HSG_TASK_PRIORITY (240) #define RVM_DUN_GW_TASK_PRIORITY (240) #define RVM_FAX_GW_TASK_PRIORITY (240) #define RVM_ATP_UART_TASK_PRIORITY (240) #define RVM_ATP_TASK_PRIORITY (255) /* ** Drivers and Services Priorities ** Note: FFS priority should be lower than every user */ #define RVM_SPI_TASK_PRIORITY (39) #define RVM_TTY_TASK_PRIORITY (240) #define RVM_AUDIO_TASK_PRIORITY (245) #define RVM_AUDIO_BGD_TASK_PRIORITY (246) #define RVM_RTC_TASK_PRIORITY (248) #define RVM_FFS_TASK_PRIORITY (250) #define RVM_TRACE_TASK_PRIORITY (251) #define RVM_DAR_TASK_PRIORITY (245) #define RVM_ETM_TASK_PRIORITY (249) #define RVM_MKS_TASK_PRIORITY (255) #define RVM_KPD_TASK_PRIORITY (10) #define RVM_MPM_TASK_PRIORITY (242) #define RVM_RNET_WS_TASK_PRIORITY (80) #define RVM_RNET_RT_TASK_PRIORITY (240) #define RVM_DCM_TASK_PRIORITY (240) #define RVM_MFW_TASK_PRIORITY (245) /* ** RV Test Menu and Dummy Tasks Priorities */ #define RVM_RVTEST_MENU_TASK_PRIORITY (240) #define RVM_DUMMY_TASK_PRIORITY (80) //#define IDLE_TASK_PRIORITY (80) /* A-M-E-N-D-E-D! */ #define RVM_INVKR_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE1_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE2_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE3_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE4_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE5_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE6_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TMS_TASK_PRIORITY (200) /* A-M-E-N-D-E-D! */ #endif /* __RVM_PRIORITIES_H_ */