FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/tm_cust0/l1tm_tpu12.c @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_TPU2.C
 *
 *        Filename %M%
 *        Version  %I%
 *        Date     %G%
 * 
 ************* Revision Controle System Header *************/
#include "l1_confg.h"

#if (TESTMODE && (RF==12))

#include "tm_defs.h"
#include "l1_const.h"
#include "l1_types.h"

#include "l1tm_defty.h"
#include "l1tm_cust.h"
#include "l1tm_tpu12.h"

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif
////////////////////////////henry
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif
///////////////////////////  
#include "l1_defty.h"
#include "l1_msgty.h"
#include "l1_tabs.h"

#include "l1tm_msgty.h"
#include "l1tm_varex.h"

#if ((ANLG_FAM == 1) || (ANLG_FAM == 2))
  #include "spi_drv.h"
#endif   

#include "tpudrv12.h"
#include "l1_rf12.h"


#include <string.h>

// Import band configuration from Flash module (need to replace by an access function)


// External function prototypes


void Cust_tm_tpu_table_write        (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[])
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_WRITE;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

void Cust_tm_tpu_table_read         (T_TM_RETURN *tm_return, WORD8 index)
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_READ;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

#endif //TESTMODE