FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/gtt_include/ctm/diag_deinterleaver.h @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*

*******************************************************************************

*

*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH

*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100

*

*      The program(s) may be used and/or copied only with the

*      written permission from Ericsson or in accordance

*      with the terms and conditions stipulated in the agreement or

*      contract under which the program(s) have been supplied.

*

*******************************************************************************

*

*      File             : diag_interleaver.h

*      Purpose          : diagonal (chain) deinterleaver routine

*

*******************************************************************************

*/

#ifndef diag_deinterleaver_h

#define diag_deinterleaver_h "$Id: $"

#include "l1_confg.h"

/*

*******************************************************************************

*                         INCLUDE FILES

*******************************************************************************

*/



#include "init_interleaver.h"



/*

*******************************************************************************

*                         DECLARATION OF PROTOTYPES

*******************************************************************************

*/



/* ---------------------------------------------------------------------- */

/* diag_deinterleaver:                                                    */

/* Corresponding deinterleaver to diag_interleaver.                       */

/* An arbitrary number of bits can be interleaved, depending of the       */

/* length of the vector "in". The vector "out", which must have the same  */

/* length than "in", contains the interleaved samples.                    */

/* All states (memory etc.) of the interleaver are stored in the variable */

/* *intl_state. Therefore, a pointer to this variable must be handled to  */

/* this function. This variable initially has to be initialized by the    */

/* function init_interleaver, which offers also the possibility to        */

/* specify the dimensions of the deinterleaver matrix.                    */

/* ---------------------------------------------------------------------- */



void diag_deinterleaver(WORD16 *out,

                        WORD16 *in,

                        WORD16 num_valid_bits,

                        interleaver_state_t *intl_state);



/* ---------------------------------------------------------------------- */

/* shift_deinterleaver:                                                   */

/* Shift of the deinterleaver buffer by <shift> samples.                  */

/* shift>0  -> shift to the right                                         */

/* shift<0  -> shift to the left                                          */

/* The elements from <insert_bits> are inserted into the resulting space. */

/* The vector <insert_bits> must have at least abs(shift) elements.       */

/* ---------------------------------------------------------------------- */



void shift_deinterleaver(WORD16 shift,

                         WORD16 *insert_bits,

                         interleaver_state_t *ptr_state);


#if(NEW_WKA_PATCH==1)
  void just_shift(WORD16 shift, WORD16* in_bits, interleaver_state_t *intl_state);
#endif

#if (TTY_SYNC_MCU == 1)
  void flush_and_shift_deinterleaver(WORD16 shift,WORD16 *insert_bits,interleaver_state_t *ptr_state);
#endif

#if(TTY_SYNC_MCU_2==1)
  WORD16 flush_diag_deint(WORD16 *out, WORD16 *in, interleaver_state_t *intl_state);
  void zero_pad_deint(interleaver_state_t *intl_state);
#endif

#if(OPTIMISED==1)
void new_diag_deinterleaver(WORD16 *out,
                        WORD16 jump,
                        WORD16 *flush_vector,
                        WORD16 *in,
                        WORD16 num_valid_bits,
                        interleaver_state_t *intl_state);
#endif

#endif