FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/cfile/l1_api_hisr.c @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1_API_HISR.C
 *
 *        Filename l1_api_hisr.c
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/

#include "l1_confg.h"
#include "nucleus.h"
#include "sys_types.h"
#include "l1_types.h"
#include "l1audio_cust.h"
#include "l1audio_defty.h"
#include "l1audio_const.h"
#include "l1_const.h"
#include "cust_os.h"
#include "l1tm_defty.h"
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif
#if (L1_MP3 == 1)
  #include "l1mp3_const.h"
  #include "l1mp3_signa.h"
  #include "l1mp3_defty.h"
  #include "l1mp3_proto.h"
#endif
#if (L1_MIDI == 1)
  #include "l1midi_const.h"
  #include "l1midi_signa.h"
  #include "l1midi_defty.h"
  #include "l1midi_proto.h"
#endif
#if (L1_AAC == 1)
  #include "l1aac_const.h"
  #include "l1aac_signa.h"
  #include "l1aac_defty.h"
  #include "l1aac_proto.h"
#endif
#if (L1_DYN_DSP_DWNLD==1)
  #include "l1_dyn_dwl_defty.h"
  #include "l1_dyn_dwl_msgty.h"
  #include "l1_dyn_dwl_const.h"
  #include "l1_dyn_dwl_signa.h"
  #include "l1_dyn_dwl_error.h"
  #include "l1_dyn_dwl_proto.h" 
  #include "l1_api_hisr.h"
#endif
#include "l1_defty.h"
#include "l1_api_hisr.h"
#include "l1audio_signa.h"
#include "l1_varex.h"
#include "l1_macro.h"
#include "mem.h"


/*-------------------------------------------------------------*/
/* l1_api_handler()                                            */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : API interrupt handler, multiplexed for:       */
/*               1) audio sources: MP3 or AAC                 */
/*               2) modem sources: USF                         */
/*                                                             */
// The API Interrupt is multiplexed between (DYN DWNLD, MP3 ,AAC) and FAST USF. 
// DYN DWNLD, MP3 and AAC are mutually exclusive and hence only one would be
// active at one time. But FAST USF would co-exist with any of the them and hence
// there needs to be a way to distinguish the two sources of the API Interrupt. A flag
// d_dsp_hint_flag is used by the DSP to signify the source of the interrupt. The bit 
// configuration of d_dsp_hint_flag is 
// 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 
//                                                                 | |____> Fast USF
//                                                                 |______> (DYN DWNLD, MP3, AAC)


void l1_api_handler()
{
#if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) || (FF_L1_FAST_DECODING == 1)
extern NU_HISR api_modemHISR;
#endif

#if ( (L1_MP3 == 1) || (L1_AAC == 1) || (L1_MIDI == 1) || (L1_DYN_DSP_DWNLD == 1) )
  extern NU_HISR apiHISR;
#endif

#if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) || (FF_L1_FAST_DECODING == 1)
#if (FF_L1_FAST_DECODING == 1)  
 if (l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag & (1 << B_FAST_DECODING_FLAG))
  {
    // Flag HISR to be scheduled
    l1a_apihisr_com.fast_decoding.pending = TRUE;
    // Clear API ISR condition
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag &= ~(1 << B_FAST_DECODING_FLAG);
    l1a_apihisr_com.fast_decoding.crc_error = 
            l1s_dsp_com.dsp_ndb_ptr->d_fast_paging_data & (C_FAST_DECODING_CRC_FIRE1);
    NU_Activate_HISR(&api_modemHISR);  // activate API modem HISR
  }
#endif /* FF_L1_FAST_DECODING */  
#if (FF_L1_IT_DSP_USF == 1) 
   if (l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag & (1 << B_USF_HINT_ISSUED))
  {
    // Flag HISR to be scheduled
    l1a_apihisr_com.usf.pending = TRUE;
    // Clear API ISR condition
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag &= ~(1 << B_USF_HINT_ISSUED);
    NU_Activate_HISR(&api_modemHISR);  // activate API modem HISR
  }
#endif //(FF_L1_IT_DSP_USF == 1) 
#if (FF_L1_IT_DSP_DTX == 1)
  
  if ((l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag & 0x4 ) != 0) // DTX interrupt set by 3rd bit position from left
  {
    // Flag HISR to be scheduled
     l1a_apihisr_com.dtx.pending = TRUE;
    // Clear API ISR condition
    
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag &= 0xFB; //reset the 3rd bit position
    NU_Activate_HISR(&api_modemHISR);  // activate API modem HISR
  }
#endif //(FF_L1_IT_DSP_DTX == 1) 
// Call the API HISR when MP3, AAC, DYN DWNLD comes
#if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) )




   if (l1s_dsp_com.dsp_ndb_ptr->d_dsp_aud_hint_flag & (1 << B_NON_USF_HINT_ISSUED))
  {   
    // Clear API ISR condition
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_aud_hint_flag = 0;
    //Activate the API HISR
  NU_Activate_HISR(&apiHISR);
  }
#endif // (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_DYN_DSP_DWNLD == 1)
#endif //(FF_L1_IT_DSP_USF == 1) || //(FF_L1_IT_DSP_DTX == 1)

#if 0	/* FreeCalypso Frankenstein */
/* This is the original LoCosto code */

//When Fast USF is not enabled, then the API HISR needs to be called every time the DSP 
//sends a HINT interrupt.
#if (!FF_L1_IT_DSP_USF) && (!FF_L1_IT_DSP_DTX)
#if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) )
NU_Activate_HISR(&apiHISR); 
#endif
#endif
//NU_Activate_HISR(&apiHISR); //hack remove
  return;

#else

/* reconstruction of what the TCS211 code was probably like */
#if (L1_DYN_DSP_DWNLD == 1)
  if( l1_apihisr.dyn_dwnld.running == TRUE )
  {
    NU_Activate_HISR(&apiHISR); 
  }
#endif

#endif
}

/*-------------------------------------------------------------*/
/* api_hisr()                                                  */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : main function dealing with DSP->MCU interrupt */
/*                                                             */
/*-------------------------------------------------------------*/
void api_hisr(void)
{
#if (L1_MP3 == 1)
  if(l1a_apihisr_com.mp3.running==TRUE)
  {
    l1mp3_apihisr();
  }
#endif
#if (L1_MIDI == 1)
  if(l1_apihisr.midi.running==TRUE)
  {
    l1midi_apihisr();
  }
#endif
#if (L1_AAC == 1)
  if(l1a_apihisr_com.aac.running==TRUE)
  {
    l1aac_apihisr();
  }
#endif
#if (L1_DYN_DSP_DWNLD == 1)
  if( l1_apihisr.dyn_dwnld.running == TRUE )
  {
    l1_dyn_dwnld_apihisr();
  }
#endif

}

#if 0	/* FreeCalypso */
/*-------------------------------------------------------------*/
/* api_modem_hisr()                                            */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : main function dealing with DSP->MCU interrupt */
/*                                                             */
/*-------------------------------------------------------------*/
void api_modem_hisr(void)
{
#if (FF_L1_FAST_DECODING == 1)
if(l1a_apihisr_com.fast_decoding.pending == TRUE)
  {
    extern void l1_fast_decoding_apihisr(void);
    l1_fast_decoding_apihisr();
  }

#endif /* FF_L1_FAST_DECODING */  
#if (FF_L1_IT_DSP_USF == 1)
  if(l1a_apihisr_com.usf.pending == TRUE)
  {
    extern void l1usf_apihisr(void);
    l1usf_apihisr();
  }
#endif
#if (FF_L1_IT_DSP_DTX == 1)
  if(l1a_apihisr_com.dtx.pending == TRUE)
  {
    extern void l1dtx_apihisr(void);
    l1dtx_apihisr();
  }
#endif
}
#endif	/* FreeCalypso */

/*-------------------------------------------------------------*/
/* l1_trigger_api_interrupt()                                  */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : Trigger an MCU->DSP interrupt                 */
/*                                                             */
/*-------------------------------------------------------------*/
void l1_trigger_api_interrupt()
{
#if (CODE_VERSION == SIMULATION)
  extern void sim_it_mcu_to_dsp();
  sim_it_mcu_to_dsp();
#else
#if (L1_DYN_DSP_DWNLD == 1)
  *((volatile UWORD32 *)MEM_APIC_REG)|=ID_API_INT;
#else
  *((volatile UWORD32 *)MEM_APIC_REG)|=0x4;
#endif
#endif

}