FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/sap/tra.pdf @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : tra.pdf
;*** Creation       : Wed Mar 11 09:58:53 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : tra
;*** Document No.   : 8411.106.98.101
;*** Document Date  : 2002-06-10
;*** Document Status: BEING_PROCESSED
;*** Document Author: TVO
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:55:46 2007"
PRAGMA 	LAST_MODIFIED 	"2002-06-10"
PRAGMA 	ID_AND_VERSION 	"8411.106.98.101"






VALTAB 	VAL_entity_name
VAL 	6 	TRA_ENTITY_NAME_LEN 	"Max name length"

VALTAB 	VAL_ack_flg
VAL 	0 	TRA_ACK 	"acknowledged"
VAL 	1 	TRA_NAK 	"not acknowledged"

VALTAB 	VAL_dti_direction
VAL 	0 	TRA_DTI_NORMAL 	"DTI used normally"
VAL 	1 	TRA_DTI_INVERTED 	"DTI is inverted"

VALTAB 	VAL_dti_conn
VAL 	0 	TRA_CONNECT_DTI 	"Connect DTI to TRA"
VAL 	1 	TRA_DISCONNECT_DTI 	"Connect DTI to upper layer"




VAR 	entity_name 	"name of an neighbour entity" 	B

VAL 	@p_tra - VAL_entity_name@ 	

VAR 	ack_flg 	"acknowledge flag" 	B

VAL 	@p_tra - VAL_ack_flg@ 	

VAR 	link_id 	"link identifier" 	L


VAR 	dti_direction 	"DTI direction" 	B

VAL 	@p_tra - VAL_dti_direction@ 	

VAR 	dti_conn 	"DTI connect" 	B

VAL 	@p_tra - VAL_dti_conn@ 	







; TRA_ACTIVATE_REQ 	0x80000019
; TRA_ACTIVATE_CNF 	0x80004019
; TRA_DEACTIVATE_REQ 	0x80010019
; TRA_DEACTIVATE_CNF 	0x80014019
; TRA_DTI_REQ 	0x80020019
; TRA_DTI_CNF 	0x80024019
; TRA_DTI_IND 	0x80034019



PRIM 	TRA_ACTIVATE_REQ 	0x80000019
{
}






PRIM 	TRA_ACTIVATE_CNF 	0x80004019
{
 	ack_flg 	 ; acknowledge flag
}






PRIM 	TRA_DEACTIVATE_REQ 	0x80010019
{
}






PRIM 	TRA_DEACTIVATE_CNF 	0x80014019
{
}






PRIM 	TRA_DTI_REQ 	0x80020019
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; Link identifier of DTI
 	entity_name 	[TRA_ENTITY_NAME_LEN] 	 ; Communication entity name
 	dti_direction 	 ; DTI direction
}






PRIM 	TRA_DTI_CNF 	0x80024019
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; Link identifier
}






PRIM 	TRA_DTI_IND 	0x80034019
{
 	link_id 	 ; link identifier
}