FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/cdginc/p_udpa.val @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_udpa.val                                                     |
| SOURCE  : "sap\udpa.pdf"                                                 |
| LastModified : "2003-08-26"                                              |
| IdAndVersion : "8444.103.02.006"                                         |
| SrcFileTime  : "Thu Nov 29 09:56:38 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_UDPA_VAL
#define P_UDPA_VAL


#define CDG_ENTER__P_UDPA_VAL

#define CDG_ENTER__FILENAME _P_UDPA_VAL
#define CDG_ENTER__P_UDPA_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_UDPA_VAL__LAST_MODIFIED _2003_08_26
#define CDG_ENTER__P_UDPA_VAL__ID_AND_VERSION _8444_103_02_006

#define CDG_ENTER__P_UDPA_VAL__SRC_FILE_TIME _Thu_Nov_29_09_56_38_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_UDPA_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_dti_conn
 */
#define UDPA_CONNECT_DTI               (0x0)      /* Connect DTI2 to UDP            */
#define UDPA_DISCONNECT_DTI            (0x1)      /* Disconnect DTI2 from UDP       */

/*
 * Value constants for VAL_link_id
 */
#define UDPA_LINK_ID_DEFAULT           (0x0)      /* Default link id                */

/*
 * Value constants for VAL_dti_direction
 */
#define UDPA_DTI_TO_HIGHER_LAYER       (0x0)      /* DTI2 used normally             */
#define UDPA_DTI_TO_LOWER_LAYER        (0x1)      /* DTI2 is inverted               */

/*
 * Value constants for VAL_cmd
 */
#define UDPA_CONFIG_UP                 (0x0)      /* enable the interface           */
#define UDPA_CONFIG_DOWN               (0x1)      /* disable the interface          */

/*
 * user defined constants
 */
#define UDPA_ENTITY_NAME_LEN           (0x6)      

#include "CDG_LEAVE.h"


#endif