view cdg-hybrid/cdginc/p_dio.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dio.h                                                        |
| SOURCE  : "sap\dio.pdf"                                                  |
| LastModified : "2004-03-19"                                              |
| IdAndVersion : "..."                                                     |
| SrcFileTime  : "Thu Nov 29 09:39:48 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DIO_H
#define P_DIO_H


#define CDG_ENTER__P_DIO_H

#define CDG_ENTER__FILENAME _P_DIO_H
#define CDG_ENTER__P_DIO_H__FILE_TYPE CDGINC
#define CDG_ENTER__P_DIO_H__LAST_MODIFIED _2004_03_19
#define CDG_ENTER__P_DIO_H__ID_AND_VERSION _

#define CDG_ENTER__P_DIO_H__SRC_FILE_TIME _Thu_Nov_29_09_39_48_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DIO_H

#undef CDG_ENTER__FILENAME


#include "p_dio.val"

#ifndef __T_DIO_DCB_SER__
#define __T_DIO_DCB_SER__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1225
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
  U8                        _align0;                  /*<  5:  1> alignment                                          */
  U8                        _align1;                  /*<  6:  1> alignment                                          */
  U8                        _align2;                  /*<  7:  1> alignment                                          */
  U32                       baudrate;                 /*<  8:  4> user set baudrate                                  */
  U32                       char_frame;               /*< 12:  4> supported character framing                        */
  U32                       flow_control;             /*< 16:  4> supported modes of flow control                    */
  U8                        xon;                      /*< 20:  1> set/reset XON for flow control                     */
  U8                        xoff;                     /*< 21:  1> set/reset XOFF for flow control                    */
  U8                        esc_char;                 /*< 22:  1> ASCII character which is used in an escape sequence */
  U8                        _align3;                  /*< 23:  1> alignment                                          */
  U16                       guard_period;             /*< 24:  2> duration value for escape sequence                 */
  U8                        _align4;                  /*< 26:  1> alignment                                          */
  U8                        _align5;                  /*< 27:  1> alignment                                          */
} T_DIO_DCB_SER;
#endif

#ifndef __T_DIO_DCB_SER_MUX__
#define __T_DIO_DCB_SER_MUX__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1226
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
  U8                        _align0;                  /*<  5:  1> alignment                                          */
  U8                        _align1;                  /*<  6:  1> alignment                                          */
  U8                        _align2;                  /*<  7:  1> alignment                                          */
  U32                       baudrate;                 /*<  8:  4> user set baudrate                                  */
  U32                       char_frame;               /*< 12:  4> supported character framing                        */
  U32                       flow_control;             /*< 16:  4> supported modes of flow control                    */
  U8                        xon;                      /*< 20:  1> set/reset XON for flow control                     */
  U8                        xoff;                     /*< 21:  1> set/reset XOFF for flow control                    */
  U8                        esc_char;                 /*< 22:  1> ASCII character which is used in an escape sequence */
  U8                        _align3;                  /*< 23:  1> alignment                                          */
  U16                       guard_period;             /*< 24:  2> duration value for escape sequence                 */
  U8                        _align4;                  /*< 26:  1> alignment                                          */
  U8                        _align5;                  /*< 27:  1> alignment                                          */
  U32                       device_mode;              /*< 28:  4> work mode of device                                */
  U32                       mux_mode;                 /*< 32:  4> supported multiplexer modes                        */
  U16                       n1;                       /*< 36:  2> max frame size of mux frame                        */
  U8                        n2;                       /*< 38:  1> max number of retransmissions                      */
  U8                        t1;                       /*< 39:  1> acknowledgement timer                              */
  U8                        t2;                       /*< 40:  1> response timer                                     */
  U8                        t3;                       /*< 41:  1> wake up response timer                             */
  U8                        k;                        /*< 42:  1> windows size                                       */
  U8                        _align6;                  /*< 43:  1> alignment                                          */
} T_DIO_DCB_SER_MUX;
#endif

#ifndef __T_DIO_DCB_PKT__
#define __T_DIO_DCB_PKT__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1227
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
  U8                        _align0;                  /*<  5:  1> alignment                                          */
  U8                        _align1;                  /*<  6:  1> alignment                                          */
  U8                        _align2;                  /*<  7:  1> alignment                                          */
} T_DIO_DCB_PKT;
#endif

#ifndef __T_DIO_CAP_SER__
#define __T_DIO_CAP_SER__
/*
 * serial device capabiliity structures
 * CCDGEN:WriteStruct_Count==1228
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U32                       device_flags;             /*<  4:  4> driver features like power saving state            */
  U16                       mtu_control;              /*<  8:  2> max length of copied control information bytes by the driver */
  U16                       mtu_data;                 /*< 10:  2> max size of packet data which the driver can transfer */
  U32                       driver_name;              /*< 12:  4> pointer to driver name                             */
  U32                       baudrate_auto;            /*< 16:  4> automatically detected driver baudrates            */
  U32                       baudrate_fixed;           /*< 20:  4> driver baudrates which cannot be detected automatically */
  U32                       char_frame;               /*< 24:  4> supported character framing                        */
  U32                       flow_control;             /*< 28:  4> supported modes of flow control                    */
  U32                       ser_flags;                /*< 32:  4> additional supported features of serial/mux devices */
} T_DIO_CAP_SER;
#endif

#ifndef __T_DIO_CAP_SER_MUX__
#define __T_DIO_CAP_SER_MUX__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1229
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U32                       device_flags;             /*<  4:  4> driver features like power saving state            */
  U16                       mtu_control;              /*<  8:  2> max length of copied control information bytes by the driver */
  U16                       mtu_data;                 /*< 10:  2> max size of packet data which the driver can transfer */
  U32                       driver_name;              /*< 12:  4> pointer to driver name                             */
  U32                       baudrate_auto;            /*< 16:  4> automatically detected driver baudrates            */
  U32                       baudrate_fixed;           /*< 20:  4> driver baudrates which cannot be detected automatically */
  U32                       char_frame;               /*< 24:  4> supported character framing                        */
  U32                       flow_control;             /*< 28:  4> supported modes of flow control                    */
  U32                       ser_flags;                /*< 32:  4> additional supported features of serial/mux devices */
  U32                       mux_mode;                 /*< 36:  4> supported multiplexer modes                        */
} T_DIO_CAP_SER_MUX;
#endif

#ifndef __T_DIO_CAP_PKT__
#define __T_DIO_CAP_PKT__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1230
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U32                       device_flags;             /*<  4:  4> driver features like power saving state            */
  U16                       mtu_control;              /*<  8:  2> max length of copied control information bytes by the driver */
  U16                       mtu_data;                 /*< 10:  2> max size of packet data which the driver can transfer */
  U32                       driver_name;              /*< 12:  4> pointer to driver name                             */
} T_DIO_CAP_PKT;
#endif

#ifndef __T_DIO_CAP__
#define __T_DIO_CAP__
/*
 * device capabiliity structures
 * CCDGEN:WriteStruct_Count==1231
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U32                       device_flags;             /*<  4:  4> driver features like power saving state            */
  U16                       mtu_control;              /*<  8:  2> max length of copied control information bytes by the driver */
  U16                       mtu_data;                 /*< 10:  2> max size of packet data which the driver can transfer */
  U32                       driver_name;              /*< 12:  4> pointer to driver name                             */
} T_DIO_CAP;
#endif

#ifndef __T_DIO_DCB__
#define __T_DIO_DCB__
/*
 * all elements of driver configuration parameter 
 * CCDGEN:WriteStruct_Count==1232
 */
typedef struct
{
  U32                       device_type;              /*<  0:  4> device identifier with general capability information */
  U8                        sleep_mode;               /*<  4:  1> enter sleep mode is possible or not                */
  U8                        _align0;                  /*<  5:  1> alignment                                          */
  U8                        _align1;                  /*<  6:  1> alignment                                          */
  U8                        _align2;                  /*<  7:  1> alignment                                          */
} T_DIO_DCB;
#endif

#ifndef __T_dio_segment__
#define __T_dio_segment__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1233
 */
typedef struct
{
  U8                        _align0;                  /*<  0:  1> alignment                                          */
  U8                        _align1;                  /*<  1:  1> alignment                                          */
  U16                       c_data;                   /*<  2:  2> counter                                            */
  U8                        *ptr_data;                /*<  4:  4> pointer to  pointer to the first byte of the data buffer segment */
} T_dio_segment;
#endif

#ifndef __T_dio_buffer__
#define __T_dio_buffer__
/*
 * data buffer
 * CCDGEN:WriteStruct_Count==1234
 */
typedef struct
{
  U16                       length;                   /*<  0:  2> len of dio_ctrl                                    */
  U8                        _align0;                  /*<  2:  1> alignment                                          */
  U8                        c_dio_segment;            /*<  3:  1> counter                                            */
  T_dio_segment             *ptr_dio_segment;         /*<  4:  4> pointer to Structured Element                      */
} T_dio_buffer;
#endif

#ifndef __T_DIO_CTRL__
#define __T_DIO_CTRL__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1235
 */
typedef struct
{
  U16                       control_type;             /*<  0:  2> data types                                         */
  U16                       length;                   /*<  2:  2> len of dio_ctrl                                    */
} T_DIO_CTRL;
#endif

#ifndef __T_DIO_CTRL_LINES__
#define __T_DIO_CTRL_LINES__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1236
 */
typedef struct
{
  U16                       control_type;             /*<  0:  2> data types                                         */
  U16                       length;                   /*<  2:  2> len of dio_ctrl                                    */
  U32                       state;                    /*<  4:  4> line states                                        */
} T_DIO_CTRL_LINES;
#endif

#ifndef __T_DIO_CTRL_MUX__
#define __T_DIO_CTRL_MUX__
/*
 * Structured Element
 * CCDGEN:WriteStruct_Count==1237
 */
typedef struct
{
  U16                       control_type;             /*<  0:  2> data types                                         */
  U16                       length;                   /*<  2:  2> len of dio_ctrl                                    */
  U32                       state;                    /*<  4:  4> line states                                        */
} T_DIO_CTRL_MUX;
#endif


/*
 * End of substructure section, begin of primitive definition section
 */


#include "CDG_LEAVE.h"


#endif