FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/cdginc/p_mmreg.val @ 220:0ed36de51973

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
ABB semaphore protection overhaul The ABB semaphone protection logic that came with TCS211 from TI was broken in several ways: * Some semaphore-protected functions were called from Application_Initialize() context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with NU_INVALID_SUSPEND in this context, but the return value wasn't checked, and NU_Release_Semaphore() would be called unconditionally at the end. The latter call would increment the semaphore count past 1, making the semaphore no longer binary and thus no longer effective for resource protection. The fix is to check the return value from NU_Obtain_Semaphore() and skip the NU_Release_Semaphore() call if the semaphore wasn't properly obtained. * Some SPI hardware manipulation was being done before entering the semaphore- protected critical section. The fix is to reorder the code: first obtain the semaphore, then do everything else. * In the corner case of L1/DSP recovery, l1_abb_power_on() would call some non-semaphore-protected ABB & SPI init functions. The fix is to skip those calls in the case of recovery. * A few additional corner cases existed, all of which are fixed by making ABB semaphore protection 100% consistent for all ABB functions and code paths. There is still one remaining problem of priority inversion: suppose a low- priority task calls an ABB function, and some medium-priority task just happens to preempt right in the middle of that semaphore-protected ABB operation. Then the high-priority SPI task is locked out for a non-deterministic time until that medium-priority task finishes its work and goes back to sleep. This priority inversion problem remains outstanding for now.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 20:55:25 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_mmreg.val                                                    |
| SOURCE  : "sap\mmreg.pdf"                                                |
| LastModified : "2003-06-13"                                              |
| IdAndVersion : "6147.100.96.110"                                         |
| SrcFileTime  : "Thu Nov 29 09:46:52 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_MMREG_VAL
#define P_MMREG_VAL


#define CDG_ENTER__P_MMREG_VAL

#define CDG_ENTER__FILENAME _P_MMREG_VAL
#define CDG_ENTER__P_MMREG_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MMREG_VAL__LAST_MODIFIED _2003_06_13
#define CDG_ENTER__P_MMREG_VAL__ID_AND_VERSION _6147_100_96_110

#define CDG_ENTER__P_MMREG_VAL__SRC_FILE_TIME _Thu_Nov_29_09_46_52_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_MMREG_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_detach_cause
 */
#define CS_SIM_REM                     (0x0)      /* Consider SIM as removed or not valid */
#define CS_POW_OFF                     (0x1)      /* Power off and delete SIM data  */
#define CS_SOFT_OFF                    (0x2)      /* Power off and keep SIM data    */

/*
 * Value constants for VAL_mode
 */
#define MODE_AUTO                      (0x0)      /* automatic mode                 */
#define MODE_MAN                       (0x1)      /* manual mode                    */

/*
 * Value constants for VAL_service
 */
#define NREG_NO_SERVICE                (0x0)      /* no service available           */
#define NREG_LIMITED_SERVICE           (0x1)      /* limited service available      */

/*
 * Value constants for VAL_forb_ind
 */
#define FORB_PLMN_NOT_INCLUDED         (0x0)      /* Not member of the forbidden PLMN list */
#define FORB_PLMN_INCLUDED             (0x1)      /* Member of the forbidden PLMN list */

/*
 * Value constants for VAL_search_running
 */
#define SEARCH_NOT_RUNNING             (0x0)      /* Network search not running anymore */
#define SEARCH_RUNNING                 (0x1)      /* Network search still running   */

/*
 * Value constants for VAL_tz
 */
#define TIMEZONE_GMT                   (0x0)      /* GMT                            */
#define TIMEZONE_GMT_PLS_1HR           (0x40)     /* GMT + 1 hour                   */
#define TIMEZONE_GMT_PLS_2HR           (0x80)     /* GMT + 2 hours                  */
#define TIMEZONE_GMT_MIN_1HR           (0x48)     /* GMT - 1 hour                   */
#define TIMEZONE_GMT_MIN_2HR           (0x88)     /* GMT - 2 hours                  */

/*
 * Value constants for VAL_month
 */

/*
 * Value constants for VAL_second
 */

/*
 * Value constants for VAL_minute
 */

/*
 * Value constants for VAL_hour
 */

/*
 * Value constants for VAL_day
 */

/*
 * Value constants for VAL_year
 */

// VALTAB-FF: REL99 
// 
// Value constants for VAL_daylight_save_time
// 
// #define MMR_ADJ_NO                     (0x0)   /* No adjustment for Daylight Saving Time */
// #define MMR_TIME_ADJ_1                 (0x1)   /* +1 hour adjustment for Daylight Saving Time */
// #define MMR_TIME_ADJ_2                 (0x2)   /* +2 hours adjustment for Daylight Saving Time */

/*
 * Value constants for VAL_service_mode
 */
#define SERVICE_MODE_LIMITED           (0x0)      /* Search for limited service required */
#define SERVICE_MODE_FULL              (0x1)      /* Search for full service required */

/*
 * Value constants for VAL_cause
 */
#define MMCS_IMSI_IN_HLR               (0x402)    /* IMSI unknown in HLR            */
#define MMCS_ILLEGAL_MS                (0x403)    /* Illegal MS                     */
#define MMCS_IMSI_IN_VLR               (0x404)    /* IMSI unknown in VLR            */
#define MMCS_IMEI_NOT_ACCEPTED         (0x405)    /* IMEI not accepted              */
#define MMCS_ILLEGAL_ME                (0x406)    /* Illegal ME                     */
#define MMCS_PLMN_NOT_ALLOWED          (0x40b)    /* PLMN not allowed               */
#define MMCS_LA_NOT_ALLOWED            (0x40c)    /* Location Area not allowed      */
#define MMCS_ROAMING_NOT_ALLOWED       (0x40d)    /* Roaming not allowed in this location area */
#define MMCS_NO_SUITABLE_CELL_IN_LA    (0x40f)    /* Find another allowed location area in the same PLMN */
#define MMCS_NETWORK_FAILURE           (0x411)    /* Network failure                */
#define MMCS_CONGESTION                (0x416)    /* Congestion                     */
#define MMCS_SERVICE_NOT_SUPPORTED     (0x420)    /* Service option not supported   */
#define MMCS_SERVICE_NOT_SUBSCRIBED    (0x421)    /* Requested service option not subscribed */
#define MMCS_SERVICE_ORDER             (0x422)    /* Service option temporarily out of order */
#define MMCS_IDENTIFIY                 (0x426)    /* Call cannot be identified      */
#define MMCS_RETRY_IN_NEW_CELL         (0x430)    /* retry upon entry into a new cell (mapped 0x0430..0x043f -> 0x0430) */
#define MMCS_INCORRECT_MESSAGE         (0x45f)    /* Semantically incorrect message */
#define MMCS_INVALID_MAND_MESSAGE      (0x460)    /* Invalid mandatory information  */
#define MMCS_MESSAGE_TYPE_NOT_IMPLEM   (0x461)    /* Message type non-existent or not implemented */
#define MMCS_MESSAGE_TYPE_INCOMPAT     (0x462)    /* Message type not compatible with the protocol state */
#define MMCS_IE_NOT_IMPLEM             (0x463)    /* Information element non-existent or not implemented */
#define MMCS_CONDITIONAL_IE            (0x464)    /* Conditional IE error           */
#define MMCS_MESSAGE_INCOMPAT          (0x465)    /* Message not compatible with the protocol state */
#define MMCS_UNSPECIFIED               (0x46f)    /* Protocol error, unspecified    */
#define MMCS_SUCCESS                   (0xc400)   /* No error, successful operation (MM) */
#define MMCS_NO_REGISTRATION           (0xc480)   /* MS is not registered or deregistration started */
#define MMCS_TIMER_RECOVERY            (0xc481)   /* time-out in MM during establishment */
#define MMCS_NO_REESTABLISH            (0xc482)   /* Cell does not support call reestablishment */
#define MMCS_INT_PREEM                 (0xc483)   /* Preemptive release, e.g. MO-MT clash in MM */
#define MMCS_PLMN_NOT_IDLE_MODE        (0xc484)   /* reject, not in idle mode (MMR_PLMN_IND) */
#define MMCS_AUTHENTICATION_REJECTED   (0xc488)   /* AUTHENTICATION REJECT received */
#define MMCS_SIM_REMOVED               (0xc489)   /* A valid SIM is not present     */
#define MMCS_INT_NOT_PRESENT           (0xc4ff)   /* No error cause (MM)            */

/*
 * Value constants for VAL_ciph
 */
#define CIPH_OFF                       (0x0)      /* ciphering off                  */
#define CIPH_ON                        (0x1)      /* ciphering on                   */

/*
 * Value constants for VAL_bootup_act
 */
#define NORMAL_REG                     (0x0)      /* Normal Registration            */
#define QUICK_REG                      (0x1)      /* Fast Registration              */

/*
 * Value constants for VAL_bootup_cause
 */
#define REG_END                        (0x0)      /* end of registration            */
#define PWR_SCAN_START                 (0x1)      /* power scanning started         */

/*
 * user defined constants
 */
#define MAX_PLMN_ID                    (0xc)      
#define MMR_MAX_TEXT_LEN               (0x28)     
#define SIZE_MCC                       (0x3)      
#define SIZE_MNC                       (0x3)      
#define MM_ORIGINATING_ENTITY          (0x4)      

#include "CDG_LEAVE.h"


#endif