FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/cdginc/p_gsim.val @ 220:0ed36de51973

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
ABB semaphore protection overhaul The ABB semaphone protection logic that came with TCS211 from TI was broken in several ways: * Some semaphore-protected functions were called from Application_Initialize() context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with NU_INVALID_SUSPEND in this context, but the return value wasn't checked, and NU_Release_Semaphore() would be called unconditionally at the end. The latter call would increment the semaphore count past 1, making the semaphore no longer binary and thus no longer effective for resource protection. The fix is to check the return value from NU_Obtain_Semaphore() and skip the NU_Release_Semaphore() call if the semaphore wasn't properly obtained. * Some SPI hardware manipulation was being done before entering the semaphore- protected critical section. The fix is to reorder the code: first obtain the semaphore, then do everything else. * In the corner case of L1/DSP recovery, l1_abb_power_on() would call some non-semaphore-protected ABB & SPI init functions. The fix is to skip those calls in the case of recovery. * A few additional corner cases existed, all of which are fixed by making ABB semaphore protection 100% consistent for all ABB functions and code paths. There is still one remaining problem of priority inversion: suppose a low- priority task calls an ABB function, and some medium-priority task just happens to preempt right in the middle of that semaphore-protected ABB operation. Then the high-priority SPI task is locked out for a non-deterministic time until that medium-priority task finishes its work and goes back to sleep. This priority inversion problem remains outstanding for now.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 20:55:25 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsim.val                                                     |
| SOURCE  : "sap\gsim.pdf"                                                 |
| LastModified : "2003-02-04"                                              |
| IdAndVersion : "8441.113.99.004"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:12 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSIM_VAL
#define P_GSIM_VAL


#define CDG_ENTER__P_GSIM_VAL

#define CDG_ENTER__FILENAME _P_GSIM_VAL
#define CDG_ENTER__P_GSIM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSIM_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__P_GSIM_VAL__ID_AND_VERSION _8441_113_99_004

#define CDG_ENTER__P_GSIM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_12_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSIM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gu
 */
#define GSIM_GU_NA                     (0x0)      /* GPRS update status not applicable (i.e. this parameter shall be ignored) */
#define GSIM_GU1_UPDATED               (0x1)      /* last GPRS attach or RAU attempt successful */
#define GSIM_GU2_NOT_UPDATED           (0x2)      /* last GPRS attach or RAU attempt failed procedurally */
#define GSIM_GU3_ROAMING_NOT_ALLOWED   (0x3)      /* last GPRS attach or RAU attempt correctly performed, but negative answer from network received */

/*
 * Value constants for VAL_tmsi
 */
#define GSIM_TMSI_INVALID              (0xffffffff)/* P-TMSI invalid (see GSM 3.03)  */

/*
 * Value constants for VAL_ptmsi_signature_flag
 */
#define GSIM_PTMSI_SIG_DEL             (0x0)      /* P-TMSI Dignature shall be deleted */
#define GSIM_PTMSI_SIG_VALID           (0x1)      /* P-TMSI Signature is valid      */
#define GSIM_PTMSI_SIG_NA              (0x2)      /* P-TMSI Signature not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_gsim_cksn
 */
#define GSIM_CKSN_NA                   (0x0)      /* GPRS ciphering key sequence number not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_sim_gprs_invalid
 */
#define GSIM_SIM_GPRS_NA               (0x0)      /* not applicable (i.e. this parameter shall be ignored) */
#define GSIM_SIM_GPRS_VALID            (0x1)      /* SIM is considered as valid for GPRS */
#define GSIM_SIM_GPRS_INVALID          (0x2)      /* SIM is considered as invalid for GPRS */

/*
 * user defined constants
 */
#define GSIM_PTMSI_NA                  (0xffffffff)
#define SIZE_SRES                      (0x4)      
#define SIZE_KC                        (0x8)      
#define SIZE_RAND                      (0x10)     
#define MAX_IMSI                       (0x9)      

#include "CDG_LEAVE.h"


#endif