FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/udp/udp_kerf.c @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 19 Oct 2020 05:11:29 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +---------------------------------------------------------------------------- | Project : | Modul : +---------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +---------------------------------------------------------------------------- | Purpose : This Modul defines the functions for processing | of incomming primitives for the component | Internet Protocol of the mobile station +---------------------------------------------------------------------------- */ #define ENTITY_UDP #include <string.h> #include "typedefs.h" #include "pcm.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "macdef.h" /* to get PFREE_DESC2 */ #include "custom.h" #include "gsm.h" #include "prim.h" #include "cus_udp.h" #include "cnf_udp.h" #include "mon_udp.h" #include "pei.h" #include "tok.h" #include "dti.h" /* to get dti lib */ #include "udp.h" #include "ip_udp.h" /* +--------------------------------------------------------------------+ | PROJECT : WAP MODULE : udp_kerf.c | | STATE : code ROUTINE : init_udp | +--------------------------------------------------------------------+ PURPOSE : Init the global variables of UDP */ void init_udp (void) { T_HILA * p_ul; T_LOLA * p_dl; T_KER * p_ker = & udp_data->ker; /* Set global variables for every entity */ INIT_STATE (HILA, DOWN); INIT_STATE (LOLA, DOWN); p_ul = & udp_data->hila; *p_ul->entity_name = 0; p_ul->dti_state = DTI_CLOSED; p_ul->dti_data_req = NULL; p_dl = & udp_data->lola; *p_dl->entity_name = 0; p_dl->dti_state = DTI_CLOSED; p_dl->dti_data_ind = NULL; p_dl->drop_packet = FALSE; p_dl->state_err = STATE_DL_NO_ERROR; p_dl->src_addr = NO_ADDR; p_dl->dst_addr = NO_ADDR; p_dl->dst_port = NO_PORT; p_dl->src_port = NO_PORT; /* Downlink and uplink for one entity */ p_ker->send_icmp = FALSE; p_ker->port_state = PORT_DOWN; p_ker->dti_data_req_icmp = NULL; p_ker->dst_addr = NO_ADDR; p_ker->src_addr = NO_ADDR; p_ker->src_port = NO_PORT; p_ker->dst_port = NO_PORT; } /* +--------------------------------------------------------------------+ | PROJECT : WAP MODULE : udp_kerf.c | | STATE : code ROUTINE : udp_build_packet | +--------------------------------------------------------------------+ PURPOSE : Build UDP and ICMP packets to send */ void udp_build_packet (BOOL hila, UBYTE to_do) { T_KER * p_ker = & udp_data->ker; if (hila) /* Build the packets for higher layer */ { switch (to_do) { case B_NORMAL_PACKET: { T_desc_list2 * desc_list = & udp_data->hila.dti_data_req->desc_list2; T_desc2 * desc = (T_desc2 *) desc_list->first; USHORT udp_payload_len = desc_list->list_len; if (desc == NULL) { TRACE_ERROR ("Hila's desc == NULL in udp_build_packet()."); return; } else { /* Make a new desc for the IP and UDP packet header */ USHORT headroom = LEN_IP_HEADER_B + LEN_UDP_HEADER_B; UBYTE * ip_header; T_desc2 * desc_new = M_ALLOC (offsetof (T_desc2, buffer) + headroom); if (desc_new == NULL) { TRACE_ERROR ("Not enough memory in udp_build_packet()."); return; } desc_new->next = (ULONG) desc; desc_new->offset = 0; desc_new->len = headroom; desc_new->size = headroom; ip_header = desc_new->buffer; { register unsigned i; for (i=0; i < headroom; i++) ip_header[i] = '\0';/*lint !e661 !e662 (Warning -- access/creation of out-of-bounds pointer) */ } /* Put the desc at the first place of the descs and * build the UDP header */ desc_list->first = (ULONG) desc_new; desc_list->list_len = (USHORT) (desc_new->len + desc_list->list_len); /* Fill in IP header information */ SET_IP_VERSION (ip_header, IP_VERSION); SET_IP_HEADER_LEN (ip_header, MIN_HEADER_LEN); /*lint -e{661, 662} (Warning -- access/creation of out-of-bounds pointer) */ { SET_IP_TOTAL_LEN (ip_header, desc_list->list_len); SET_IP_PROT (ip_header, UDP_PROT); SET_IP_SOURCE_ADDR (ip_header, p_ker->src_addr); SET_IP_DEST_ADDR (ip_header, p_ker->dst_addr); SET_UDP_SRC_PORT (ip_header, p_ker->src_port); SET_UDP_DST_PORT (ip_header, p_ker->dst_port); SET_UDP_LEN (ip_header, udp_payload_len + LEN_UDP_HEADER_B); } { UBYTE pseudo_header [LEN_PSEUDO_HEADER_B]; ULONG overlay; USHORT chksum; /* Build the pseudoheader for to calculate the chksum */ SET_UDP_PSEUDO_H_SRC_ADDR (pseudo_header, p_ker->src_addr); SET_UDP_PSEUDO_H_DEST_ADDR (pseudo_header, p_ker->dst_addr); SET_UDP_PSEUDO_H_ZERO (pseudo_header, 0); SET_UDP_PSEUDO_H_PROT (pseudo_header, UDP_PROT); SET_UDP_PSEUDO_H_LEN (pseudo_header, udp_payload_len + LEN_UDP_HEADER_B); /* Calculate the checksum for the pseudoheader */ overlay = partial_checksum (pseudo_header, LEN_PSEUDO_HEADER_B); /* Calculate for the UDP header and the data */ RESET_UDP_CHKSUM (ip_header, LEN_IP_HEADER_B);/*lint !e661 !e662 (Warning -- access/creation of out-of-bounds pointer) */ chksum = desc_checksum (desc_list, LEN_IP_HEADER_B, overlay); SET_UDP_CHKSUM (ip_header, LEN_IP_HEADER_B, chksum);/*lint !e661 !e662 (Warning -- access/creation of out-of-bounds pointer) */ } } } break; default: break; } } else /* Build the packets for lower layer */ { T_LOLA * p_dl = & udp_data->lola; T_desc_list2 * desc_list = & p_dl->dti_data_ind->desc_list2; T_desc2 * desc = (T_desc2 *) desc_list->first; if (desc == NULL) { TRACE_ERROR ("Lola's desc == NULL in udp_build_packet()."); return; } if (desc->len < LEN_IP_HEADER_B) { TRACE_ERROR ( "Lola's desc->len < LEN_IP_HEADER_B " "in udp_build_packet()." ); return; } if (GET_IP_HEADER_LEN_B (desc->buffer + desc->offset) < LEN_IP_HEADER_B) { TRACE_ERROR ( "Lola's GET_IP_HEADER_LEN_B() < LEN_IP_HEADER_B " "in udp_build_packet()." ); return; } switch (to_do) { case B_NORMAL_PACKET: { /* Build a new desc for IP addresses and port numbers */ T_desc2 * addr = M_ALLOC ( offsetof (T_desc2, buffer) + sizeof (T_SRC_DES) ); if (addr == NULL) { TRACE_ERROR ("Not enough memory in udp_build_packet()."); return; } addr->next = (ULONG) desc; addr->offset = 0; addr->len = sizeof (T_SRC_DES); addr->size = sizeof (T_SRC_DES); memcpy (((T_SRC_DES *) addr->buffer)->src_ip, & p_dl->src_addr, 4); memcpy (((T_SRC_DES *) addr->buffer)->des_ip, & p_dl->dst_addr, 4); memcpy (((T_SRC_DES *) addr->buffer)->src_port, & p_dl->src_port, 2); memcpy (((T_SRC_DES *) addr->buffer)->des_port, & p_dl->dst_port, 2); desc_list->first = (ULONG) addr; desc_list->list_len = (USHORT) (addr->len + desc_list->list_len); /* Filter out the given IP and UDP header */ { register unsigned headroom = GET_IP_HEADER_LEN_B (desc->buffer + desc->offset) + LEN_UDP_HEADER_B; if (desc->len < headroom) { TRACE_ERROR ("Lola's IP packet is short in udp_build_packet()."); return; } memmove ( desc->buffer + desc->offset, desc->buffer + desc->offset + headroom, desc->len - headroom ); desc->len = (USHORT) (desc->len - headroom); desc_list->list_len = (USHORT) (desc_list->list_len - headroom); } } break; case B_NO_DEST_PORT: { /* We build the whole ICMP packet */ PPASS (p_dl->dti_data_ind, data_req, DTI2_DATA_REQ); desc_list = & data_req->desc_list2; desc = (T_desc2 *) desc_list->first; build_icmp_with_payload ( data_req, IDENTITY_0, STANDARD_TTL, GET_IP_DEST_ADDR (desc->buffer + desc->offset), ICMP_TYP_DEST_URECHBL, ICMP_CODE_NO_PORT ); p_ker->dti_data_req_icmp = data_req; } break; default: break; } } } /*-------------------------------------------------------------------------*/