FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/p_gsim.val @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 19 Oct 2020 05:11:29 +0000 |
| parents | 35f7a1dc9f7d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_gsim.val | | SOURCE : "sap\gsim.pdf" | | LastModified : "2003-02-04" | | IdAndVersion : "8441.113.99.004" | | SrcFileTime : "Thu Nov 29 09:43:12 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_GSIM_VAL #define P_GSIM_VAL #define CDG_ENTER__P_GSIM_VAL #define CDG_ENTER__FILENAME _P_GSIM_VAL #define CDG_ENTER__P_GSIM_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_GSIM_VAL__LAST_MODIFIED _2003_02_04 #define CDG_ENTER__P_GSIM_VAL__ID_AND_VERSION _8441_113_99_004 #define CDG_ENTER__P_GSIM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_12_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_GSIM_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_gu */ #define GSIM_GU_NA (0x0) /* GPRS update status not applicable (i.e. this parameter shall be ignored) */ #define GSIM_GU1_UPDATED (0x1) /* last GPRS attach or RAU attempt successful */ #define GSIM_GU2_NOT_UPDATED (0x2) /* last GPRS attach or RAU attempt failed procedurally */ #define GSIM_GU3_ROAMING_NOT_ALLOWED (0x3) /* last GPRS attach or RAU attempt correctly performed, but negative answer from network received */ /* * Value constants for VAL_tmsi */ #define GSIM_TMSI_INVALID (0xffffffff)/* P-TMSI invalid (see GSM 3.03) */ /* * Value constants for VAL_ptmsi_signature_flag */ #define GSIM_PTMSI_SIG_DEL (0x0) /* P-TMSI Dignature shall be deleted */ #define GSIM_PTMSI_SIG_VALID (0x1) /* P-TMSI Signature is valid */ #define GSIM_PTMSI_SIG_NA (0x2) /* P-TMSI Signature not applicable (i.e. this parameter shall be ignored) */ /* * Value constants for VAL_gsim_cksn */ #define GSIM_CKSN_NA (0x0) /* GPRS ciphering key sequence number not applicable (i.e. this parameter shall be ignored) */ /* * Value constants for VAL_sim_gprs_invalid */ #define GSIM_SIM_GPRS_NA (0x0) /* not applicable (i.e. this parameter shall be ignored) */ #define GSIM_SIM_GPRS_VALID (0x1) /* SIM is considered as valid for GPRS */ #define GSIM_SIM_GPRS_INVALID (0x2) /* SIM is considered as invalid for GPRS */ /* * user defined constants */ #define GSIM_PTMSI_NA (0xffffffff) #define SIZE_SRES (0x4) #define SIZE_KC (0x8) #define SIZE_RAND (0x10) #define MAX_IMSI (0x9) #include "CDG_LEAVE.h" #endif