FreeCalypso > hg > fc-tourmaline

view cdg-hybrid/cdginc/p_aci.val @ 51:04aaa5622fa7

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_aci.val                                                      |
| SOURCE  : "sap\aci.pdf"                                                  |
| LastModified : "2004-06-01"                                              |
| IdAndVersion : "8411.105.00.205"                                         |
| SrcFileTime  : "Thu Nov 29 09:29:50 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_ACI_VAL
#define P_ACI_VAL


#define CDG_ENTER__P_ACI_VAL

#define CDG_ENTER__FILENAME _P_ACI_VAL
#define CDG_ENTER__P_ACI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_ACI_VAL__LAST_MODIFIED _2004_06_01
#define CDG_ENTER__P_ACI_VAL__ID_AND_VERSION _8411_105_00_205

#define CDG_ENTER__P_ACI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_29_50_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_ACI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cmd_src
 */
#define CMD_SRC_INT                    (0x0)      /* Command from internal application */
#define CMD_SRC_EXT                    (0x1)      /* Command from external application */
#define CMD_SRC_UNKNOWN                (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_urt_stat
 */
#define URT_RDY_TO_SEND                (0x0)      /* URT is ready to accept new data */
#define URT_DATA_AVAIL                 (0x1)      /* URT has data available         */
#define URT_STAT_UNKNOWN               (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_cause
 */
#define ABT_ABORT_DATA                 (0x0)      /* Abort data mode                */
#define ABT_ABORT_CMD                  (0x1)      /* Abort current command          */

/*
 * Value constants for VAL_ackflg
 */
#define ACI_NAK                        (0x0)      /* Not Acknowledge                */
#define ACI_ACK                        (0x1)      /* Acknowledge                    */

/*
 * user defined constants
 */
#define MAX_CMD_LEN                    (0x17c)    
#define MAX_TRC_LEN                    (0x50)     
#define MAX_DATA_LEN                   (0xc8)     

#include "CDG_LEAVE.h"


#endif