diff src/cs/drivers/drv_app/power/board/power.c @ 211:96c7a4eed1df

.../power/board/power.c: rm trailing white space
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 22 Apr 2021 20:33:27 +0000
parents 4e78acac3d88
children 0947a816580c
line wrap: on
line diff
--- a/src/cs/drivers/drv_app/power/board/power.c	Thu Apr 22 07:30:26 2021 +0000
+++ b/src/cs/drivers/drv_app/power/board/power.c	Thu Apr 22 20:33:27 2021 +0000
@@ -2,15 +2,15 @@
 *
 * power.c
 *
-* Purpose: This file contains the functions used for power on and off 
+* Purpose: This file contains the functions used for power on and off
 *          management of the board.
-*          In case of RVM_PWR_SWE, this file contains also the 
-*          functions used for charger plug and unplug management. 
+*          In case of RVM_PWR_SWE, this file contains also the
+*          functions used for charger plug and unplug management.
 *          They are all called after the occurence of the ABB interrupt.
-*																			
-* Author:  Candice Bazanegue (c-brille@ti.com)						
-*																			
-*																			
+*
+* Author:  Candice Bazanegue (c-brille@ti.com)
+*
+*
 * (C) Texas Instruments 2001
 *
 ******************************************************************************/
@@ -33,8 +33,8 @@
 #ifdef RVM_PWR_SWE
   #include "spi/spi_task.h"
   #ifndef _WINDOWS
-    #include "l1sw.cfg" 
-    #include "chipset.cfg" 
+    #include "l1sw.cfg"
+    #include "chipset.cfg"
   #endif  // _WINDOWS
   #include "pwr/pwr_messages.h"
   #include "pwr/pwr_liion_cha.h"
@@ -59,7 +59,7 @@
 **
 ** Function      Power_ON_Button
 **
-** Description:  Informs the Protocol Stack that the Power ON key has been  
+** Description:  Informs the Protocol Stack that the Power ON key has been
 **				 pressed, and thus allows it to start.
 **
 *******************************************************************************/
@@ -69,7 +69,7 @@
    SPI_GBL_INFO_PTR->is_gsm_on = TRUE;
 
    /*
-     When we build for ACI, we have no MMI, so there's no point waiting 
+     When we build for ACI, we have no MMI, so there's no point waiting
       for a keypress.  See CR 17958.
    */
 
@@ -99,7 +99,7 @@
 **
 ** Function      Power_OFF_Button
 **
-** Description:  Informs the Protocol Stack that the Power OFF key has been  
+** Description:  Informs the Protocol Stack that the Power OFF key has been
 **				 pressed, and thus allows it to stop.
 **
 *******************************************************************************/
@@ -142,7 +142,7 @@
 **
 ** Function      Switch_ON
 **
-** Description   This function is called by the spi task after the board is  
+** Description   This function is called by the spi task after the board is
 **               switched ON. It calls the appropriate function according
 **               to the ABB status register.
 **
@@ -166,13 +166,13 @@
    }
 
 #if ((ANLG_FAM == 1) || (ANLG_FAM == 2))
-   else if (Power_abb_status & ONRSTS) 
+   else if (Power_abb_status & ONRSTS)
 #elif (ANLG_FAM == 3)
    else if (Power_abb_status & RPSTS)
 #endif
    {
       /* Switch on Condition on ON REM transition 0->1 */
-      rvf_send_trace("ON Remote",9, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); 
+      rvf_send_trace("ON Remote",9, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID);
       Power_ON_Remote();
       #ifdef RVM_PWR_SWE
       pwr_handle_discharge();
@@ -183,7 +183,7 @@
    else if (Power_abb_status & CHGSTS)
    {
       /* Switch on Condition on CHARGER IC PLUG */
-      rvf_send_trace("PWR: Charger Plug",17, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); 
+      rvf_send_trace("PWR: Charger Plug",17, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID);
       if (Power_abb_status & CHGPRES)
       {
          /* charger still present */
@@ -195,7 +195,7 @@
    else
    {
       // The reset should run the SW in the same way than a Power ON
-      rvf_send_trace("Start from reset",16, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); 
+      rvf_send_trace("Start from reset",16, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID);
       Power_ON_Button();
       #ifdef RVM_PWR_SWE
       pwr_handle_discharge();
@@ -209,7 +209,7 @@
 **
 ** Function         Power_ON_Remote
 **
-** Description      
+** Description
 **
 **
 *******************************************************************************/
@@ -223,7 +223,7 @@
 **
 ** Function         Power_OFF_Remote
 **
-** Description      
+** Description
 **
 **
 *******************************************************************************/
@@ -237,7 +237,7 @@
 **
 ** Function         Power_IT_WakeUp
 **
-** Description      
+** Description
 **
 **
 *******************************************************************************/
@@ -252,7 +252,7 @@
 **
 ** Function         PWR_Charger_Plug
 **
-** Description      
+** Description
 **
 **
 *******************************************************************************/
@@ -285,21 +285,21 @@
 **
 ** Function         PWR_Charger_Unplug
 **
-** Description      
+** Description
 **
 **
 *******************************************************************************/
 void PWR_Charger_Unplug(void)
 {
    /* informs the upper layer that the charger has been unplugged */
-   pwr_send_charger_unplug_event(); 
+   pwr_send_charger_unplug_event();
 
    rvf_send_trace("Charger unplug", 14, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID );
    pwr_stop_charging();
    if (SPI_GBL_INFO_PTR->is_gsm_on == FALSE) /* GSM OFF */
    {
     #ifndef _WINDOWS
-      #if (ANLG_FAM == 1) 
+      #if (ANLG_FAM == 1)
       ABB_Write_Register_on_page(PAGE0, VRPCCTL2, 0x00EE);
       #elif ((ANLG_FAM == 2) || (ANLG_FAM == 3))
       ABB_Write_Register_on_page(PAGE0, VRPCDEV, 0x0001);