FreeCalypso > hg > fc-small-hw
comparison fc-uja/schem+bom/MCL @ 0:0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 21 Oct 2019 00:53:38 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| -1:000000000000 | 0:0f9bdd60ce50 |
|---|---|
| 1 # Connectors | |
| 2 | |
| 3 J1: | |
| 4 description=USB connector, receptacle, mini-B | |
| 5 manufacturer=AMP/TE | |
| 6 manufacturer_part_number=1734035-2 | |
| 7 vendor=Digi-Key | |
| 8 vendor_part_number=A31727CT-ND | |
| 9 npins=9 # 5 actual pins + 4 mounting pads | |
| 10 # the datasheet with the PCB footprint drawing is at | |
| 11 # ftp.ifctf.org:/pub/GSM/part_datasheets/USB/ENG_CD_1734035_E1_C_1734035.pdf | |
| 12 | |
| 13 J2: | |
| 14 manufacturer=Hirose | |
| 15 manufacturer_part_number=FH12A-12S-0.5SH | |
| 16 description=FPC connector, 12 positions, top contacts | |
| 17 vendor=Digi-Key | |
| 18 vendor_part_number=HFK112CT-ND | |
| 19 footprint=FH12_12S_05SH_1R # pin 1 on the right | |
| 20 npins=14 # 12 + 2 mounting pads | |
| 21 | |
| 22 J3: | |
| 23 footprint=HEADER14_2 | |
| 24 description=Header, 0.100", dual row, 14 posts | |
| 25 manufacturer=Molex | |
| 26 manufacturer_part_number=0901310127 | |
| 27 vendor=Digi-Key | |
| 28 vendor_part_number=WM50035-14-ND | |
| 29 npins=14 | |
| 30 | |
| 31 J4: | |
| 32 footprint=JUMPER3 | |
| 33 description=Header, 0.100", single row, 3 posts | |
| 34 manufacturer=Molex | |
| 35 manufacturer_part_number=0901200123 | |
| 36 vendor=Digi-Key | |
| 37 vendor_part_number=WM8073-ND | |
| 38 npins=3 | |
| 39 | |
| 40 # ICs | |
| 41 | |
| 42 U1: | |
| 43 manufacturer=FTDI | |
| 44 device=FT2232D | |
| 45 description=USB to UART/JTAG/GPIO adapter IC | |
| 46 vendor=Digi-Key | |
| 47 vendor_part_number=768-1010-1-ND | |
| 48 npins=48 | |
| 49 | |
| 50 U2: | |
| 51 device=93C46 | |
| 52 description=Serial EEPROM, 64x16, SOIC-8 package | |
| 53 footprint=SO8 | |
| 54 npins=8 | |
| 55 | |
| 56 U3: | |
| 57 manufacturer=TI | |
| 58 device=TLV70033DDC | |
| 59 part=yes | |
| 60 description=LDO regulator, 3.3 V output, SOT-5 | |
| 61 footprint=file:TLV700xxDDC | |
| 62 npins=5 | |
| 63 | |
| 64 U4: | |
| 65 manufacturer=TI | |
| 66 device=TLV70028DDC | |
| 67 part=yes | |
| 68 description=LDO regulator, 2.8 V output, SOT-5 | |
| 69 footprint=file:TLV700xxDDC | |
| 70 npins=5 | |
| 71 | |
| 72 # buffer for driving outputs from the adapter | |
| 73 U5: | |
| 74 device=74LVC125A | |
| 75 manufacturer=NXP | |
| 76 manufacturer_part_number=74LVC125APW | |
| 77 description=Quad buffer IC, TSSOP14 package | |
| 78 npins=14 | |
| 79 | |
| 80 # buffer for receiving outputs from the target | |
| 81 U6: | |
| 82 device=74LVC2G125 | |
| 83 manufacturer=NXP | |
| 84 manufacturer_part_number=74LVC2G125DP | |
| 85 description=Dual buffer IC, TSSOP8 package | |
| 86 npins=8 | |
| 87 | |
| 88 # OD buffer for driving nTESTRESET | |
| 89 U7: | |
| 90 device=74LVC1G07 | |
| 91 manufacturer=NXP | |
| 92 manufacturer_part_number=74LVC1G07GM | |
| 93 description=Open drain buffer IC, SOT886 package | |
| 94 npins=6 |
