FreeCalypso > hg > fc-selenite
view src/cs/services/cst/cus_cst.h @ 134:7d50d8d13711
FFS code sync with Magnetite + gcc version fix
This change brings the new flash autodetection for FC and Pirelli targets
from Magnetite, and should also fix the gcc version for C1xx and gtamodem
targets, which were previously broken because they used TI's original
flash autodetect code (which operates at address 0) while the boot ROM
is mapped there.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 11 Dec 2018 08:43:25 +0000 |
| parents | b6a5e36de839 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT : XXX SOURCE : CUS_CST.H | | AUTHOR : XXX VERSION: 1.0 | | CREATED : 01.02.99 STATE : code | +--------------------------------------------------------------------+ MODULE : CUS_CST PURPOSE : Custom dependent definitions for the CST entity of the mobile station. Use this header for definitions to integrate the protocol stack entity CST in your target system. */ #ifndef CUS_CST_H #define CUS_CST_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values for the CST * timer TXXX depending on the various channel types * and service access point identifiers. * * If your target system uses other units please * change the values. */ /* * Unit is 1 ms */ #define T_RX_VALUE 1000 #define TICS_PER_DECIHOURS (1000*60*6) /* * MAX_CST_TIMER * * Description : The constant define the number of timer available * in the timer pool. */ #define MAX_CST_TIMER 4 /* * VERSION * * Description : The constants define the type and the value of a * version identification. The version is part of the * monitor struct. */ #define T_VERSION char #define VERSION_CST "CST 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER cst_handle, #define VSI_CALLER_SINGLE cst_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif // CUS_CST_H
