# HG changeset patch
# User Mychaela Falconia <falcon@freecalypso.org>
# Date 1500254258 0
# Node ID c5c1beae5f99571eba051984ff65a83b310a13cb
# Parent  34a1e06a858744466e03907f9a8fbe882efaec6d
omrf1 txlevels profiles renamed to fcom1, see added fcom1.README

diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/fcom1-1800
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/txlevels/fcom1-1800	Mon Jul 17 01:17:38 2017 +0000
@@ -0,0 +1,2 @@
+basis 60 100 150 200 300 400 500 600 700
+targets 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/fcom1-1900
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/txlevels/fcom1-1900	Mon Jul 17 01:17:38 2017 +0000
@@ -0,0 +1,2 @@
+basis 60 100 150 200 300 400 500 600 700
+targets 29.2 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/fcom1-900
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/txlevels/fcom1-900	Mon Jul 17 01:17:38 2017 +0000
@@ -0,0 +1,2 @@
+basis 70 100 150 200 300 400 500 600 700 750
+targets 32.2 31 29 27 25 23 21 19 17 15 13 11 9 7 5
diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/fcom1.README
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/txlevels/fcom1.README	Mon Jul 17 01:17:38 2017 +0000
@@ -0,0 +1,24 @@
+The name "fcom1" stands for "FreeCalypso hardware, Openmoko-based, version 1",
+and the set of Tx power level calibration profiles named "fcom1" has been
+created empirically by the Mother of FreeCalypso to produce successful Tx level
+calibration runs on our current FCDEV3B boards with our current CMU200 and
+cabling setup.
+
+These fcom1 Tx power level calibration profiles should ONLY be used for
+(re)calibrating FreeCalypso-made hardware, i.e., FCDEV3B boards and potentially
+other closely related FC hardware designs in the future; these profiles are NOT
+expected to be correct for recalibrating Openmoko's own FreeRunners or for
+calibrating other (non-FreeCalypso) Openmoko-derived GSM devices that retain
+the internal antenna and the Murata SWD RF test port used by Openmoko, as
+opposed to the SMA used on our FCDEV3B.
+
+For anyone interested in one of those latter use cases, a different set of
+profiles would need to be created; the Mother is not currently able to create
+those profiles with a good confidence of correctness despite owning several
+Openmoko-made FreeRunners and the appropriate Murata MXHS83QH3000 adapter
+because the insertion loss of the latter adapter is not precisely known.
+Knowing the total insertion loss along the full path from the DUT to the CMU200
+is a prerequisite for determining the correct profiles for Tx power level
+calibration, and when Murata SWD/SWF RF test ports are involved, this cabling
+path includes both the cable from the CMU200 ending in an SMA and the adapter
+from Murata that goes between the SMA and their switch connector.
diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/omrf1-1800
--- a/txlevels/omrf1-1800	Mon Jul 17 00:03:27 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +0,0 @@
-basis 60 100 150 200 300 400 500 600 700
-targets 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/omrf1-1900
--- a/txlevels/omrf1-1900	Mon Jul 17 00:03:27 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +0,0 @@
-basis 60 100 150 200 300 400 500 600 700
-targets 29.2 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
diff -r 34a1e06a8587 -r c5c1beae5f99 txlevels/omrf1-900
--- a/txlevels/omrf1-900	Mon Jul 17 00:03:27 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,2 +0,0 @@
-basis 70 100 150 200 300 400 500 600 700 750
-targets 32.2 31 29 27 25 23 21 19 17 15 13 11 9 7 5