FreeCalypso > hg > fc-rfcal-tools

comparison INSTALL @ 97:037d9200aae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
INSTALL: refer to doc/Cable-config-howto
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 17 Jul 2017 19:15:44 +0000
parents b443d0665c1f
children 44c6a2b4d40a
comparison
equal deleted inserted replaced
96:ea54469409d4 97:037d9200aae4
13 /opt/freecalypso, run 'make' to compile the calibration sw. Then run 13 /opt/freecalypso, run 'make' to compile the calibration sw. Then run
14 'make install' to add the calibration programs to your FC software installation 14 'make install' to add the calibration programs to your FC software installation
15 under /opt/freecalypso. 15 under /opt/freecalypso.
16 16
17 You will also need to create one or more cable config files corresponding to 17 You will also need to create one or more cable config files corresponding to
18 your cabling setup(s); see doc/cableconf-example. These cable config files 18 your cabling setup(s) and place them in the /opt/freecalypso/rfcal/cableconf
19 need to be placed in the /opt/freecalypso/rfcal/cableconf directory, and they 19 directory: see doc/Cable-config-howto.
20 should be given some appropriately descriptive names:
21
22 * If you have a cable setup that terminates in an SMA connector for calibrating
23 Calypso GSM devices with SMA antenna interfaces, the corresponding cable
24 config file should be named "sma".
25
26 * If you have a cable setup that terminates in an MS-147 probe connector for
27 recalibrating Mot C1xx phones or similar, the corresponding cable config file
28 should be named "ms147".
29
30 * If you have a cable setup that terminates in a Murata SWD/SWF probe for
31 working with devices like Openmoko GTA0x, the corresponding cable config file
32 should be named "murata".
33
34 You will then select the cable configuration to be used in a given calibration
35 session with the -c option to fc-cmu200d.