view configs/hybrid-nogprs @ 680:ee3ac8c617cb

armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents 28ed4002131a
children
line wrap: on
line source

# TCS2/TCS3 hybrid config with GPRS disabled,
# but CSD and fax support (FAX_AND_DATA) still enabled

GPRS=0
MMI=0
SRVC=1
export GPRS MMI SRVC

ATP_STATE=0
FCHG_STATE=0
LCC_STATE=0
MKS_STATE=0
PWR_STATE=0
R2D_STATE=0
export ATP_STATE FCHG_STATE LCC_STATE MKS_STATE PWR_STATE R2D_STATE

scripts/config-headers-new.sh

CONDAT=condat3
GPF=gpf3
CDGINC=cdg-hybrid/cdginc
CDGPRIM=cdg-hybrid/sap-inline
ACI=g23m-aci
export CONDAT GPF CDGINC CDGPRIM ACI

build_lib ccddata

# ACI libs
build_lib aci tcs3
build_lib aciext tcs3
build_lib aci_dti_mng tcs3
build_lib atiext tcs3
build_lib comlib hybrid
build_lib config_gsm_fl
build_lib config_gsm_ir
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

# G23M protocol stack libs
build_lib alr sotovik
build_lib cc
build_lib dl
build_lib dti
build_lib fad
build_lib l1_pei
build_lib l2r
build_lib mm
build_lib ra
build_lib rlp
build_lib rr
build_lib sim_b_lib
build_lib sms
build_lib ss
build_lib t30
build_lib uart_b_lib

# Condat drivers
build_lib gdi

# GPF
build_lib ccd_na7_db
build_lib frame_na7_db_fl partial
build_lib frame_na7_db_ir partial
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
build_lib misc_na7_db_fl
build_lib misc_na7_db_ir
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
blob_lib_gpf osx_na7_db
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
build_lib tif_na7_db_fl
build_lib tif_na7_db_ir
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

# core drivers
build_lib drivers_flash

# Layer 1
build_lib tpudrv
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
build_lib l1_ext
lib_link_magic '(BSS_LIBS (.l1s_global))'
build_lib l1_int
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
build_lib l1_custom_ext
build_lib l1_custom_int
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'

build_lib riviera_core_flash
build_lib riviera_cust_flash

# services
#build_lib atp
build_lib audio
build_lib audio_bgd
build_lib cst
build_lib dar
build_lib dar_gbl_var
lib_link_magic '(BSS_DAR_LIB (.bss))'
build_lib etm
build_lib lls
#build_lib mks

# app drivers
build_lib abb
build_lib buzzer
build_lib ffs
build_lib ffs_drv
build_lib ffs_pcm
build_lib kpd
#build_lib lcc
build_lib power
build_lib rtc_drv
build_lib sim_drv
build_lib spi_drv
build_lib uart_drv

# system glue
build_lib main init
build_lib bootloader
lib_link_magic '(CONST_BOOT_LIB (.const, .text, .text:v$3) BSS_BOOT_LIB (.bss))'

# Nucleus and TI's compiler stuff
blob_lib_os nucleus_flash_nodbg
blob_lib_os nucleus_int_ram_nodbg
lib_link_magic '(BSS_LIBS (.bss) CONST_LIBS (.text, .const))'
blob_lib_os rts16le_flash
blob_lib_os rts16le_int_ram
lib_link_magic '(BSS_LIBS (.bss))'

str2ind_blobs_used=0