FreeCalypso > hg > fc-magnetite
view components/riviera_cust_flash @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | f2e752052db5 |
children |
line wrap: on
line source
# Building riviera_cust_flash.lib CFLAGS="-mn -mt -me -pw2" CPPFLAGS="-DTOOL_CHOICE=0 -D_TMS470" if [ "$MMI" = 0 ] then case "$TARGET" in c11x|c139|c155|j100) CPPFLAGS="$CPPFLAGS -DPSEUDO_MODEM_KEEPALIVE" ;; pirelli) CPPFLAGS="$CPPFLAGS -DPSEUDO_MODEM_KEEPALIVE" CPPFLAGS="$CPPFLAGS -DPSEUDO_MODEM_USB" ;; esac fi # Includes CPPFLAGS="$CPPFLAGS -I$SRC/cs/os/nucleus" CPPFLAGS="$CPPFLAGS -I.." CPPFLAGS="$CPPFLAGS -I../config" CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc" CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/frame/cust_os" CPPFLAGS="$CPPFLAGS -I$SRC/cs/system" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rv" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app" CPPFLAGS="$CPPFLAGS -I$SRC/cs/services" # Source modules SRCDIR=$SRC/cs/riviera cfile_plain $SRCDIR/rvf/rvf_mem_pool.c cfile_plain $SRCDIR/rvm/rvm_swe.c cfile_plain $SRCDIR/rvt/rvt_api.c cfile_plain $SRCDIR/rvt/rvt_env.c cfile_plain $SRCDIR/rvt/rvt_task.c cfile_plain $SRCDIR/rvt/rvt_keepalive.c