FreeCalypso > hg > fc-magnetite
view components/r2d_drv_int_ram @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | 9737224b10e1 |
children |
line wrap: on
line source
# Building r2d_drv_int_ram.lib CFLAGS="-mn -mf -o2 -mw -me -pw2" CPPFLAGS="-DTOOL_CHOICE=0 -D_TMS470" # Includes CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app" CPPFLAGS="$CPPFLAGS -I$SRC/cs/os/nucleus" CPPFLAGS="$CPPFLAGS -I.." CPPFLAGS="$CPPFLAGS -I../config" CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc" CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/frame/cust_os" CPPFLAGS="$CPPFLAGS -I$SRC/cs/system" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rv" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd" CPPFLAGS="$CPPFLAGS -I$SRC/cs/services" # Source modules SRCDIR=$SRC/cs/drivers/drv_app/r2d cfile_plain $SRCDIR/r2d_lcd_geometry.c cfile_plain $SRCDIR/r2d_lcds.c cfile_plain $SRCDIR/r2d_refresh.c # New sourceset CFLAGS="-mn -mw -me -pw2" CPPFLAGS="-DTOOL_CHOICE=0 -D_TMS470" # Includes CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app" CPPFLAGS="$CPPFLAGS -I$SRC/cs/os/nucleus" CPPFLAGS="$CPPFLAGS -I.." CPPFLAGS="$CPPFLAGS -I../config" CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc" CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/frame/cust_os" CPPFLAGS="$CPPFLAGS -I$SRC/cs/system" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rv" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd" CPPFLAGS="$CPPFLAGS -I$SRC/cs/services" # Source modules cfile_plain $SRCDIR/lcds/r2d_geometry_no2_lcd_i.c # TCS211 build system includes 3 assembly modules at this point, # but we are omitting them because they are disabled by the # R2D_ASM=0 setting in the very same TCS211 reference version, # i.e., they assemble to empty objects.