FreeCalypso > hg > fc-magnetite

view components/gdi @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents 4d7c2ccb5814
children
line wrap: on
line source

# Building gdi.lib

CFLAGS="-me -mt -o -pw2 -x -mw"

# Defines

CPPFLAGS=-DCCDTABLES_EXTERN
CPPFLAGS="$CPPFLAGS -DOPTION_MULTITHREAD"
CPPFLAGS="$CPPFLAGS -DNEW_FRAME"
CPPFLAGS="$CPPFLAGS -DNEW_ENTITY"
CPPFLAGS="$CPPFLAGS -D_TARGET_"
CPPFLAGS="$CPPFLAGS -DSHARED_VSI"
CPPFLAGS="$CPPFLAGS -DALR"
CPPFLAGS="$CPPFLAGS -DFF_HOMEZONE"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SAT_ICON"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SMS_DYNAMIC"
CPPFLAGS="$CPPFLAGS -DFF_CPHS"
CPPFLAGS="$CPPFLAGS -D_TMS470"
CPPFLAGS="$CPPFLAGS -DUART"
CPPFLAGS="$CPPFLAGS -DFF_ATI"
CPPFLAGS="$CPPFLAGS -DNWARN"
CPPFLAGS="$CPPFLAGS -DFF_EM_MODE"
CPPFLAGS="$CPPFLAGS -DMMI=$MMI"

if [ "$MMI" = 0 ]
then
	CPPFLAGS="$CPPFLAGS -DACI"
elif [ "$MMI" = 2 ]
then
	CPPFLAGS="$CPPFLAGS -DMFW"
fi

CPPFLAGS="$CPPFLAGS -DMMI_HOMEZONE_ENABLED"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SAT_ICON"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SMS_DYNAMIC"

if [ "$GPRS" = 1 ]
then
	CPPFLAGS="$CPPFLAGS -DMMI_GPRS_ENABLED"
fi

CPPFLAGS="$CPPFLAGS -DMMI_EM_ENABLED"
CPPFLAGS="$CPPFLAGS -DNO_ASCIIZ"

case "$UI_CONFIG" in
	bigcolor)
		CPPFLAGS="$CPPFLAGS -DCOLOURDISPLAY"
		CPPFLAGS="$CPPFLAGS -DLSCREEN"
		;;
	bigbw)
		CPPFLAGS="$CPPFLAGS -DLSCREEN"
		;;
	84x48)
		;;
	*)
		echo "Error: UI_CONFIG=$UI_CONFIG setting not understood" 1>&2
		exit 1
esac

CPPFLAGS="$CPPFLAGS -DINT_PHONEBOOK"
CPPFLAGS="$CPPFLAGS -DNEW_EDITOR"
CPPFLAGS="$CPPFLAGS -DTRGT_G23"
CPPFLAGS="$CPPFLAGS -DAUS_CONDAT_TYPE_PORTING"
CPPFLAGS="$CPPFLAGS -DPHONEBOOK_EXTENSION"

if [ "$GPRS" = 1 ]
then
	CPPFLAGS="$CPPFLAGS -DGPRS"
fi

CPPFLAGS="$CPPFLAGS -DCHIPSET=$CHIPSET"
CPPFLAGS="$CPPFLAGS -DBOARD=41"
CPPFLAGS="$CPPFLAGS -DCUST=0"
CPPFLAGS="$CPPFLAGS -DTESTMODE=1"

# Includes

CPPFLAGS="$CPPFLAGS -I$SRC/$CONDAT/com/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$CONDAT/com/include"
CPPFLAGS="$CPPFLAGS -I../../$CDGINC"
CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc/nuc"
CPPFLAGS="$CPPFLAGS -I$SRC/condat2/com/src/driver"
CPPFLAGS="$CPPFLAGS -I../../$CDGPRIM"
CPPFLAGS="$CPPFLAGS -I.."
CPPFLAGS="$CPPFLAGS -I../config"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/system"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/services"

# Source modules

SRCDIR=$SRC/condat2/com/src/driver

cfile_str2ind $SRCDIR/audio.c
cfile_str2ind $SRCDIR/display.c
cfile_str2ind $SRCDIR/keypad.c
cfile_str2ind $SRCDIR/light.c
cfile_str2ind $SRCDIR/power.c
cfile_str2ind $SRCDIR/rx.c
cfile_str2ind $SRCDIR/em.c
cfile_str2ind $SRCDIR/rtc.c
cfile_str2ind $SRCDIR/vmd.c
cfile_str2ind $SRCDIR/font_bitmaps.c
cfile_str2ind $SRCDIR/ffs_coat.c