FreeCalypso > hg > fc-magnetite
view src/g23m-aci/aci/cmh_mmt.c @ 670:def882d1b354
AT+IOR and AT+IOW GPIO commands implemented in aci3
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 28 May 2020 03:15:43 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_MMT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the test functions related to the | protocol stack adapter for mobility management. +----------------------------------------------------------------------------- */ #ifndef CMH_MMT_C #define CMH_MMT_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #ifdef FAX_AND_DATA #include "aci_fd.h" #endif /* of #ifdef FAX_AND_DATA */ #include "psa.h" #include "psa_mm.h" #include "cmh.h" #include "cmh_mm.h" #ifdef GPRS #ifdef DTI #include "dti_conn_mng.h" #endif #include "gaci.h" #include "gaci_cmh.h" #include "psa_gmm.h" #include "cmh_gmm.h" #endif /*==== CONSTANTS ==================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ LOCAL T_ACI_RETURN get_available_network_list ( T_ACI_CMD_SRC srcId, T_ACI_AT_CMD cmd, SHORT startIdx, SHORT * lastIdx, T_ACI_COPS_OPDESC * operLst); LOCAL T_ACI_RETURN tAT_Plus_Percent_COPS ( T_ACI_AT_CMD at_cmd_id, T_ACI_CMD_SRC srcId, SHORT startIdx, SHORT * lastIdx, T_ACI_COPS_OPDESC * operLst ); /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PercentBAND | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %BAND=? AT command which returns the current multiband configuration. <MaxBandMode>: highest value of supported band switch modes. <AllowedBands>: bitfield of supported bands (manufacturer defined). */ GLOBAL T_ACI_RETURN tAT_PercentBAND(T_ACI_CMD_SRC srcId, T_ACI_BAND_MODE *MaxBandMode, UBYTE *AllowedBands) { UBYTE dummy; TRACE_FUNCTION ("tAT_PercentBAND()"); /* check command source */ if(!cmh_IsVldCmdSrc (srcId)) { return( AT_FAIL ); } /* process MaxBandMode parameter */ if(MaxBandMode NEQ NULL) { *MaxBandMode = BAND_MODE_Manual; /* it is currently the highest value for BandMode */ } /* process BandTypeList parameter */ if( AllowedBands NEQ NULL ) { if(cmhMM_getBandSettings(&dummy, AllowedBands)) { TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS successful"); } else { TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS failed"); } } return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMT | | STATE : code ROUTINE : tAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +COPS=? AT command which is responsible to test for all available network operators. <startIdx>: Start index for reading the list. Must be zero. <lastIdx> : Last index buffers the last read index of the list. Not used, maintained for compatibility reasons. <operLst> : List buffer to copy MAX_OPER entries into. Not used, maintained for compatibility reasons. */ GLOBAL T_ACI_RETURN tAT_PlusCOPS ( T_ACI_CMD_SRC srcId, SHORT startIdx, SHORT * lastIdx, T_ACI_COPS_OPDESC * operLst) { /* Implements Measure 29 */ return ( tAT_Plus_Percent_COPS( AT_CMD_COPS, srcId, startIdx, lastIdx, operLst ) ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMT | | STATE : code ROUTINE : tAT_PercentNRG | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %NRG=? */ GLOBAL T_ACI_RETURN tAT_PercentNRG ( T_ACI_CMD_SRC srcId, T_ACI_NRG *NRG_options) { TRACE_FUNCTION ("tAT_PercentNRG()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { return( AT_FAIL ); } /* *------------------------------------------------------------------- * check entity status *------------------------------------------------------------------- */ if( mmEntStat.curCmd NEQ AT_CMD_NONE ) { TRACE_EVENT("mmEntStat.curCmd NEQ AT_CMD_NONE"); return( AT_BUSY ); } /* * The response depends upon the value of the PLMN Mode bit. */ NRG_options->reg_mode = NRG_REG_NotPresent; NRG_options->srv_mode = NRG_SRV_NotPresent; NRG_options->opr_frmt = NRG_OPR_NotPresent; NRG_options->srv_mode = (T_ACI_NRG_SRV) (NRG_options->srv_mode | NRG_SRV_Full | NRG_SRV_Limited | NRG_SRV_NoSrv | NRG_SRV_SetRegModeOnly); NRG_options->opr_frmt = (T_ACI_NRG_OPR) (NRG_options->opr_frmt | NRG_OPR_Long | NRG_OPR_Short | NRG_OPR_Numeric); NRG_options->reg_mode = (T_ACI_NRG_REG)(NRG_options->reg_mode | NRG_REG_Auto); if(cmhSIM_isplmnmodebit_set()) { NRG_options->reg_mode = (T_ACI_NRG_REG)(NRG_options->reg_mode | NRG_REG_Manual | NRG_REG_Both); } return(AT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMT | | STATE : code ROUTINE : tAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %COPS=? AT command which is responsible to test for all available network operators. <startIdx>: start index for reading the list. <lastIdx> : last index buffers the last read index of the list <operLst> : list buffer to copy MAX_OPER entries into. */ GLOBAL T_ACI_RETURN tAT_PercentCOPS ( T_ACI_CMD_SRC srcId, SHORT startIdx, SHORT * lastIdx, T_ACI_COPS_OPDESC * operLst) { /* Implements Measure 29 */ return ( tAT_Plus_Percent_COPS( AT_CMD_P_COPS, srcId, startIdx, lastIdx, operLst ) ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMT | | STATE : code ROUTINE : get_available_network_list| +--------------------------------------------------------------------+ PURPOSE : This is common function for +COPS and %COPS test functions. */ LOCAL T_ACI_RETURN get_available_network_list ( T_ACI_CMD_SRC srcId, T_ACI_AT_CMD cmd, SHORT startIdx, SHORT * lastIdx, T_ACI_COPS_OPDESC * operLst) { T_ACI_RETURN retCd; /* holds return code */ TRACE_FUNCTION ("get_available_network_list()"); /* *------------------------------------------------------------------- * process the start index parameter in case of a network search *------------------------------------------------------------------- */ if(!cmhSIM_isplmnmodebit_set()) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow ); return( AT_FAIL ); } if( startIdx EQ 0 ) { mmEntStat.curCmd = cmd; mmShrdPrm.owner = (T_OWN)srcId; mmEntStat.entOwn = srcId; #if defined (GPRS) AND defined (DTI) if( psaG_MM_CMD_NET_SRCH ( ) < 0 ) /* search for network */ #else if( psaMM_NetSrch () < 0 ) /* search for network */ #endif { TRACE_EVENT( "FATAL RETURN psaMM_NetSrch in COPS" ); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal ); return( AT_FAIL ); } retCd = AT_EXCT; } else { /* * For g23m, it makes no sense to support a startIdx different from zero * as MM only delivers GMMREG_MAX_PLMN_ID PLMNs which is identical to * MAX_PLMN_ID. So the MMI already gets all the desired information * by the callback rAT_PlusCOPS(). * For other programs like Neptune this maybe different, this is for * further study. */ ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = cmd; cmdLog.cmdType = CLOG_TYPE_Test; cmdLog.retCode = retCd; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = ACI_NumParmNotPresent; cmdLog.cmdPrm.tCOPS.srcId = srcId; cmdLog.cmdPrm.tCOPS.startIdx = startIdx; cmdLog.cmdPrm.tCOPS.lastIdx = lastIdx; cmdLog.cmdPrm.tCOPS.operLst = operLst; rAT_PercentCLOG( &cmdLog ); } #endif return( retCd ); } /* Implements Measure 29 */ /* +------------------------------------------------------------------------------ | Function : tAT_Plus_Percent_COPS +------------------------------------------------------------------------------ | Description : This is the functional counterpart to the +COPS=? or %COPS=? | AT command which is responsible to test for all available | network. | Argument at_cmd_id will be used to pass AT_CMD_COPS or | AT_CMD_P_COPS in case of AT command +COPS=? or %COPS=?. | | | Parameters : at_cmd_id - AT command identifier | srcId - AT command source identifier | startIdx - start index for reading the list. | lastIdx - last index buffers the last read index of the | list | operLst - list buffer to copy MAX_OPER entries into. | | Return : ACI functional return codes +------------------------------------------------------------------------------ */ LOCAL T_ACI_RETURN tAT_Plus_Percent_COPS ( T_ACI_AT_CMD at_cmd_id, T_ACI_CMD_SRC srcId, SHORT startIdx, SHORT * lastIdx, T_ACI_COPS_OPDESC * operLst ) { TRACE_FUNCTION ( "tAT_Plus_Percent_COPS()" ); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { return( AT_FAIL ); } /* *------------------------------------------------------------------- * check entity status *------------------------------------------------------------------- */ if( mmEntStat.curCmd NEQ AT_CMD_NONE ) { return( AT_BUSY ); } /* *------------------------------------------------------------------- * process the start index parameter in case of a network search *------------------------------------------------------------------- */ return( get_available_network_list( srcId, at_cmd_id, startIdx, lastIdx, operLst ) ); } /*==== EOF ========================================================*/