view src/g23m-aci/aci/line_split_intern.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  
|  Modul   :  line edit
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul ...
+-----------------------------------------------------------------------------
*/

#ifndef LINE_SPLIT_INTERN_H
#define LINE_SPLIT_INTERN_H

#define LEDIT_MAX_CMD_NAME_LEN (17)
#define LEDIT_MAX_S_NAME_LEN   (2)

#define SEARCH_BAT_LEN  (0)
#define SEARCH_DIAL_LEN (1)
#define SEARCH_EXT_LEN  (2)

#define BATCMD_NO_SUPP  (0)
#define BATCMD_SUPPORT  (1)
#define BATCMD_DIAL     (2) /* D <---- SPECIAL */
#define BATCMD_S_PARAM  (3) /* S <---- SPECIAL */

#define ANDCMD_NO_SUPP  (0)
#define ANDCMD_SUPPORT  (1)


typedef enum
{
  LEDIT_CHAR_TERMINATED = 0x00,
  LEDIT_CHAR_PERCENT    = 0x25, /* '%' */
  LEDIT_CHAR_AND        = 0x26, /* '&' */
  LEDIT_CHAR_PLUS       = 0x2B, /* '+' */
  LEDIT_CHAR_COMMA      = 0x2C, /* ',' */
  LEDIT_CHAR_NUMBER     = 0x30, /* '0' symbolic for 0..9 */
  LEDIT_CHAR_SEPARATOR  = 0x3B, /* ';' */
  LEDIT_CHAR_SET        = 0x3D, /* '=' */
  LEDIT_CHAR_READ       = 0x3F, /* '?' */
  LEDIT_CHAR_CHAR       = 0x41, /* 'A' symbolic for A..Z*/
  LEDIT_CHAR_EXT         = 0x5B, /*'[' symbolic for the rest of characters*/
  LEDIT_CHAR_INVALID    = 0xFF
} T_LEDIT_CHAR_TYPE;

typedef enum
{
  LEDIT_BASIC_NAME, /* consists of one char only */
  LEDIT_S_NAME,     /* first char must be 'S' and then only digits */
  LEDIT_EXT_NAME    /* multi char name           */
} T_LEDIT_NAME_TYPE;

typedef enum
{
  LEDIT_BASIC_PARAM, /* consists of digits  only */
  LEDIT_DIAL_PARAM,  /* the ending ';' is important to inform about voice or data call */
  LEDIT_EXT_PARAM    /* digits ,, "strings" ;    */
} T_LEDIT_PARAM_TYPE;

EXTERN T_LEDIT_RSLT ledit_split      (T_LEDIT_INTERN *leditInt);
EXTERN void         ledit_free_cmd   (T_LEDIT_INTERN *leditInt);

#endif