view src/cs/services/lls/lls_api.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/**
 * @file   lls_api.h
 *
 * API Definition for LLS (Low Level Servies) Service.
 *
 * This file gathers all the constants, structure and functions declaration
 * useful for a LLS service user.
 *
 * @author   Laurent Sollier (l-sollier@ti.com)
 * @version 0.1
 */

/*
 * History:
 *
 *   Date          Author       Modification
 *  ----------------------------------------
 *  03/12/2002     L Sollier    Create
 *
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _LLS_API_H_
#define _LLS_API_H_


#include "rv/rv_general.h"

/**
 * @name External types
 *
 * Types used in API.
 *
 */
/*@{*/

/** Definition of available equipment, ... for D-Sample
 */
#define LLS_LED_A         0x01
#define LLS_BACKLIGHT     0x02
#define LLS_PRECHARGE_LED 0x03

/*@}*/

typedef UINT8 T_LLS_EQUIPMENT;

/**
 * @name API functions
 *
 * API functions declarations.
 */
/*@{*/

/**
 * function: lls_switch_on
 *
 * This function switch on an equipment.
 *
 * @param   equipment_sort    equipment sort.
 * @return
 *    - RV_OK if operation is successful,
 *    - RV_INVALID_PARAMETER if one parameter is incorrect,
 *    - RV_NOT_SUPPORTED 
 *
 */
T_RV_RET lls_switch_on(T_LLS_EQUIPMENT equipment_sort);


/**
 * function: lls_switch_off
 *
 * This function switch off an equipment.
 *
 * @param   equipment_sort    equipment sort.
 * @return
 *    - RV_OK if operation is successful,
 *    - RV_INVALID_PARAMETER if one parameter is incorrect,
 *    - RV_NOT_SUPPORTED 
 *
 */
T_RV_RET lls_switch_off(T_LLS_EQUIPMENT equipment_sort);


/*@}*/




#endif /* #ifndef _LLS_API_H_ */