view src/cs/services/dar/dar_handle_message.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  dar_handle_message.c                                        */
/*                                                                          */
/*  Purpose:   This function is called when the DAR entity receives a new   */
/*             message in its mailbox.                                      */
/*                                                                          */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date                 Modification                                       */
/*  ------------------------------------                                    */
/*  17 October 2001    Create                                               */
/*                                                                          */
/*  Author     Stephanie Gerthoux                                           */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#ifdef RVM_DAR_SWE

   #include "rv/rv_general.h"
   #include "rvm/rvm_gen.h"
   #include "rvm/rvm_priorities.h"
   #include "dar/dar_api.h"
   #include "dar/dar_env.h"
   #include "dar/dar_macro_i.h"
   #include "dar/dar_messages_i.h"
   #include "dar/dar_msg_ft.h"

   /********************************************************************************/
   /* Function         dar_handle_message                                          */
   /*                                                                              */
   /* Description      This function is called every time the DAR entity received  */
   /*                  a new message in its mailbox                                */
   /*                                                                              */
   /********************************************************************************/

   T_RV_RET dar_handle_msg(T_RV_HDR	*msg_p)
   {
      /* Declare local variables */
      T_RV_RET status = RVF_GREEN;

      if (msg_p != NULL)
      {
         switch (msg_p->msg_id)
         {
            case DAR_FILTER_REQ:
            {
               //DAR_SEND_TRACE_PARAM("DAR Diagnose with the msg", msg_p->msg_id, RV_TRACE_LEVEL_DEBUG_LOW);
               /* process the dar filter */
               dar_filter_request((T_DAR_FILTER_START *)msg_p);
               break;
            }

            case DAR_WRITE_REQ:
            {
               //DAR_SEND_TRACE_PARAM("DAR Diagnose with the msg", msg_p->msg_id, RV_TRACE_LEVEL_DEBUG_LOW);
               /* process the dar to write */
               dar_write_data_in_buffer((T_DAR_WRITE_START *)msg_p);
               break;
            }
      
            default: 
            {
               /* Unknow message has been received */
               DAR_TRACE_WARNING("A DAR unknow message has been received ");
               break; 
            };
         } /* switch (msg_p->msg_id) */
  
         /* Free message buffer */
         status = rvf_free_buf((T_RVF_BUFFER *)msg_p);
         if (status != RVF_GREEN)
         {
            DAR_SEND_TRACE(" DAR ERROR (env). A wrong message is deallocated ",
                            RV_TRACE_LEVEL_ERROR);
         }
      } /* if (msg_p != NULL) */
  
      return RV_OK;
   }

#endif /* #ifdef RVM_DAR_SWE */