FreeCalypso > hg > fc-magnetite

view src/cs/services/atp/atp_uart_env.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/********************************************************************************/
/*                                                                              */
/*    File Name:         atp_uart_env.h                                         */
/*                                                                              */
/*    Purpose:           This header file contains the prototypes used to:      */
/*                          - get some information about the ATP-UART           */
/*                            interface, such as its name or the memory         */
/*                            requirements,                                     */
/*                          - set the memory bank identifier dedicated to the   */
/*                            ATP-UART interface,                               */
/*                          - initialize the ATP-UART interface,                */
/*                          - activate the ATP-UART interface,                  */
/*                          - prepare the termination of the ATP-UART           */
/*                            interface,                                        */
/*                          - kill the ATP-UART interface.                      */
/*                                                                              */
/*    Note:              None.                                                  */
/*                                                                              */
/*    Revision History:                                                         */
/*       10/04/01        Pascal Pompei                                          */
/*                          - Create.                                           */
/*                                                                              */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved.   */
/*                                                                              */
/********************************************************************************/
#ifndef _ATP_UART_ENV_
#define _ATP_UART_ENV_

#include "atp/atp_pool_size.h"	/* Stack & Memory Bank sizes definitions */

/****************************** MEMORY REQUIREMENTS *****************************/
/*                                                                              */
/* Define the memory requirements of the ATP-UART interface.                    */
#define ATP_UART_MB_PRIM_SIZE          ATP_UART_MB1_SIZE
#define ATP_UART_MB_PRIM_WATERMARK     (ATP_UART_MB_PRIM_SIZE - 256)


/*************************** LOCAL FUNCTION PROTOTYPES **************************/
/*                                                                              */
/* Define the local fonction prototypes.                                        */
T_RVM_RETURN atp_uart_get_info (T_RVM_INFO_SWE  *info_software_entity_p);

T_RVM_RETURN atp_uart_set_info (T_RVF_ADDR_ID  addr_id,
								T_RV_RETURN    return_path_p[],
								T_RVF_MB_ID    *mb_id_p,
								T_RVM_CB_FUNC  error_function_p);

T_RVM_RETURN atp_uart_init (void);

T_RVM_RETURN atp_uart_core (void);

T_RVM_RETURN atp_uart_stop (void);

T_RVM_RETURN atp_uart_kill (void);
#endif