FreeCalypso > hg > fc-magnetite

view src/cs/riviera/rv/rv_trace.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************************************************************************************* 
 *																			         * 
 *  Name        rv_trace.h													         * 
 *																			         * 
 *  Function    this file contains trace definitions for basic layers		         * 
 *																			         * 
 *  Date        Modification                                                         * 
 *  ------------------------												         * 
 *  10/12/00	 - Create Cristian Livadiotti - c-livadiotti@ti.com			         * 
 *																			         * 
 *																			         * 
 * (C) Copyright 1999 by Texas Instruments Incorporated, All Rights Reserved         * 
 *                                                                                   *
 * --------------------------------------------------------------------------------- *
 *                                                                                   *
 *   History:                                                                        *
 *                                                                                   *
 *   10/18/2001 - Updated for R2D by Christophe Favergeon		                     * 
 *                                                                                   *
 *************************************************************************************/

#ifndef _RV_TRACE_H_
#define _RV_TRACE_H_



/* Define trace levels.                                                          */
#define RV_TRACE_LEVEL_ERROR		(1)		/* Error condition trace messages.   */
											/* Used when an unrecoverable error is found */
#define RV_TRACE_LEVEL_WARNING		(2)		/* Warning condition trace messages. */
											/* Used when an error is found but is handled properly by the code*/
#define RV_TRACE_LEVEL_DEBUG_HIGH	(3)		/* Debug messages (high debugging).  */
                                            /* high = important debug message */
#define RV_TRACE_LEVEL_DEBUG_MEDIUM	(4)		/* Debug messages.                   */
#define RV_TRACE_LEVEL_DEBUG_LOW	(5)		/* Debug messages (low debugging).   */
                                            /* low = not important debug message */

/* temporary definition of this old flag for backward compatibility */
#define TRACE_RVTEST				(0x001E0004)

#endif /* _RV_GENERAL_H_*/