FreeCalypso > hg > fc-magnetite

view src/cs/layer1/include/l1_macro.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_MACRO.H
 *
 *        Filename l1_macro.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#include "l1_confg.h"

#if(L1_DYN_DSP_DWNLD == 1)
  #include "l1_dyn_dwl_const.h"
#endif

#if (TRACE_TYPE==5) && NUCLEUS_TRACE
//WARNING : this type of trace takes a lot of space in data RAM (~16kB)

  // switch for Nucleus debugging messages.
  #define NU_ALLOC_ERR      0
  #define NU_DEALLOC_ERR    1
  #define NU_RCVE_QUEUE_ERR 2
  #define NU_SEND_QUEUE_ERR 3
  #define NU_OBTA_SEMA_ERR  4
  #define NU_RLSE_SEMA_ERR  5

  // Nucleus debug function.
    #define DEBUGMSG(status,type) \
    if(status) switch(type) \
    { \
      case NU_ALLOC_ERR: \
      printf("NU mem. allocation error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_DEALLOC_ERR: \
      printf("NU mem. deallocation error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_RCVE_QUEUE_ERR: \
      printf("NU rcve queue error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_SEND_QUEUE_ERR: \
      printf("NU send queue error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_OBTA_SEMA_ERR: \
      printf("NU obtain semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_RLSE_SEMA_ERR: \
      printf("NU release semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      default: \
      printf("Unknown error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
    }
#else
  #define DEBUGMSG(status,type)
#endif

/************************************************************/
/* Macros for FAST INTEGER MODULO implementation.           */
/************************************************************/
#define IncMod(operand, increment, modulo) \
  if( (operand += increment) >= modulo ) operand -= modulo
  

// Define MACRO for selecting the min. time to next task.
#define Select_min_time(Task_Time, Min_Time) \
  if(Task_Time < Min_Time) Min_Time = Task_Time;


/************************************************************/
/* Macros for MCU/DSP API address conversion    .           */
/************************************************************/
#if(L1_DYN_DSP_DWNLD == 1)

#define API_address_dsp2mcu(dsp_address) \
  (MCU_API_BASE_ADDRESS + ((API)((dsp_address) - DSP_API_BASE_ADDRESS) * 2))

#define API_address_mcu2dsp(mcu_address) \
  (DSP_API_BASE_ADDRESS + ((UWORD32)((mcu_address) - MCU_API_BASE_ADDRESS) / 2))
#endif