FreeCalypso > hg > fc-magnetite

view src/cs/layer1/audio_cfile/l1audio_drive.c @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents b870b6a44d31
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1AUDIO_DRIVE.C
 *
 *        Filename l1audio_drive.c
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

/************************************/
/* Include files...                 */
/************************************/

#include "l1_macro.h"
#include "l1_confg.h"

#if (AUDIO_TASK == 1)

  #include "l1_types.h"
  #include "sys_types.h"

  #if (CODE_VERSION == SIMULATION) && (AUDIO_SIMULATION)


    #include <stdlib.h>
    #include <string.h>
      
    #include "iq.h"             // Debug / Init hardware  ("eva3.lib")
    #include "l1_ver.h"
    #include "l1_const.h"
    #include "l1_signa.h"

    #if TESTMODE
      #include "l1tm_defty.h"
    #endif

    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
    #include "l1audio_msgty.h"

    #if (L1_GTT == 1)
      #include "l1gtt_const.h"
      #include "l1gtt_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_DYN_DSP_DWNLD == 1)
      #include "l1_dyn_dwl_const.h"
      #include "l1_dyn_dwl_defty.h"
    #endif
    #if (L1_MP3 == 1)
      #include "l1mp3_defty.h"
    #endif

    #if (L1_MIDI == 1)
      #include "l1midi_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_AAC == 1)
      #include "l1aac_defty.h"
    #endif

    #include "l1_defty.h"
    #include "cust_os.h"
    #include "l1_msgty.h"
    #include "l1_varex.h"

    #include "l1_mftab.h"
    #include "l1_tabs.h"
    #include "l1_ctl.h"
       

    #include "l1_time.h"
    #include "l1_scen.h"

  #else
  // Layer1 and debug include files.

    #include <ctype.h>
    #include <math.h>
    #include "l1_ver.h"
    #include "l1_const.h"
    #include "l1_signa.h"

    #if TESTMODE
      #include "l1tm_defty.h"
    #endif
 
    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
    #include "l1audio_msgty.h"

    #if (L1_GTT == 1)
      #include "l1gtt_const.h"
      #include "l1gtt_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_DYN_DSP_DWNLD == 1)
      #include "l1_dyn_dwl_const.h"
      #include "l1_dyn_dwl_defty.h"
    #endif
    #if (L1_MP3 == 1)
      #include "l1mp3_defty.h"
    #endif

    #if (L1_MIDI == 1)
      #include "l1midi_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_AAC == 1)
      #include "l1aac_defty.h"
    #endif

    #include "l1_defty.h"
    #include "cust_os.h"
    #include "l1_msgty.h"
    #include "tpudrv.h"       // TPU drivers.           ("eva3.lib")
    #include "l1_varex.h"

    #include "l1_proto.h"
    #include "l1_mftab.h"
    #include "l1_tabs.h"
    #include "mem.h"
    #include "armio.h"
    #include "timer.h"
    #include "timer1.h"
    #include "dma.h"
    #include "inth.h"
    #include "ulpd.h"
    #include "rhea_arm.h"
    #include "clkm.h"         // Clockm  ("eva3.lib")
    #include "l1_ctl.h"

    #include "l1_time.h"
    #if L2_L3_SIMUL
      #include "l1_scen.h"
    #endif
  #endif

  #include "l1audio_macro.h"

  /**************************************/
  /* Prototypes for L1 SYNCH manager    */
  /**************************************/
  void vocoder_mute_dl (BOOL mute);
  void vocoder_mute_ul (BOOL mute);
 #if (AUDIO_DSP_FEATURES == 1)
  void L1_audio_sidetone_write(UWORD16 sidetone_value);
  void L1_audio_CAL_DlVolume_write(UWORD16 vol_value);
  void L1_audio_CAL_UlVolume_write(UWORD16 vol_value);
  void L1_audio_volume_speed_write(UWORD16 volspeed_value);
 #endif

  /**************************************/
  /* External prototypes                */
  /**************************************/

  /*-------------------------------------------------------*/
  /* vocoder_mute_dl()                                     */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : Mute the DL vocoder.                    */
  /*                                                       */
  /*-------------------------------------------------------*/
  void vocoder_mute_dl(BOOL mute)
  {
    if (mute)
    {
    // Set the DL vocoder mute bit in the d_tch_mode register
      l1s_dsp_com.dsp_ndb_ptr->d_tch_mode |= (0x01<<14);
    }
    else
    {
      // Reset the DL vocoder mute bit in the d_tch_mode register
      l1s_dsp_com.dsp_ndb_ptr->d_tch_mode &= ~(0x01<<14);
    }
  }

  /*-------------------------------------------------------*/
  /* vocoder_mute_ul()                                     */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : Mute the UL vocoder.                    */
  /*                                                       */
  /*-------------------------------------------------------*/
  void vocoder_mute_ul(BOOL mute)
  {
    if (mute)
    {
    // Set the UL vocoder mute bit in the d_tch_mode register
      l1s_dsp_com.dsp_ndb_ptr->d_tch_mode |= (0x01<<15);
    }
    else
    {
      // Reset the UL vocoder mute bit in the d_tch_mode register
      l1s_dsp_com.dsp_ndb_ptr->d_tch_mode &= ~(0x01<<15);
    }
  } 

 #if (AUDIO_DSP_FEATURES == 1)
  /*-------------------------------------------------------*/
  /* L1_audio_sidetone_write()                             */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : write sidetone gain in API for DSP      */
  /*               sidetone process                        */
  /*                                                       */
  /*-------------------------------------------------------*/
  void L1_audio_sidetone_write(UWORD16 sidetone_value)
  {
    l1s_dsp_com.dsp_ndb_ptr->d_sidetone_level = (API) sidetone_value;
  } 

  /*-------------------------------------------------------*/
  /* L1_audio_CAL_DlVolume_write()                         */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : write DL gain in API for DSP vol ctrl   */
  /*               process                                 */
  /*                                                       */
  /*-------------------------------------------------------*/
  void L1_audio_CAL_DlVolume_write(UWORD16 vol_value)
  {
    l1s_dsp_com.dsp_ndb_ptr->d_vol_dl_level = (API) vol_value;
  } 

  /*-------------------------------------------------------*/
  /* L1_audio_CAL_UlVolume_write()                         */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : write UL gain in API for DSP vol ctrl   */
  /*               process                                 */
  /*                                                       */
  /*-------------------------------------------------------*/
  void L1_audio_CAL_UlVolume_write(UWORD16 vol_value)
  {
    l1s_dsp_com.dsp_ndb_ptr->d_vol_ul_level = (API) vol_value;
  } 

  /*-------------------------------------------------------*/
  /* L1_audio_volume_speed_write()                         */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : write volume speed in API for DSP vol   */
  /*               ctrl process                            */
  /*                                                       */
  /*-------------------------------------------------------*/
  void L1_audio_volume_speed_write(UWORD16 volspeed_value)
  {
    l1s_dsp_com.dsp_ndb_ptr->d_vol_speed = (API) volspeed_value;
  } 

 #endif /* DSP_AUDIO_FEAT */

#endif // AUDIO_TASK