FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/timer/timer.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer.h Description : timer.c header Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.3 Date and time : 07/23/98 16:25:53 Previous delta : 07/23/98 16:25:52 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.h Sccs Id (SID) : '@(#) timer.h 1.3 07/23/98 16:25:53 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #define TIMER_CNTL_REG MEM_TIMER_ADDR /* watchdog Control Timer register */ #define TIMER_ST 0x0080 #define TIMER_AR 0x0100 #define TIMER_PTV 0x0e00 #define TIMER_CNTL_MASK 0x0f80 #define TIMER_MODE_MASK 0x80ff #define TIMER_LOAD_REG (MEM_TIMER_ADDR + 0x02) /* Timer load register */ #define TIMER_READ_REG (MEM_TIMER_ADDR + 0x02) /* Timer read register */ #define TIMER_MODE_REG (MEM_TIMER_ADDR + 0x04) /* Timer mode register */ #define TIMER_WDOG 0x8000 /* watch dog */ #define START_STOP 1 /*to start or stop a timer */ #define AR 0x0002 #define PTV 0x001c #define TIMER_CLK_EN 0x0020 #define TIMER1_CNTL (MEM_TIMER1 + 0x00) #define TIMER1_LOAD_TIM (MEM_TIMER1 + 0x02) #define TIMER1_READ_TIM (MEM_TIMER1 + 0x04) #define TIMER2_CNTL (MEM_TIMER2 + 0x00) #define TIMER2_LOAD_TIM (MEM_TIMER2 + 0x02) #define TIMER2_READ_TIM (MEM_TIMER2 + 0x04) /*-------------------------------------------------------------- * TIMER_START_STOP () *-------------------------------------------------------------- * Parameters : start or stop command * Return : none * Functionality : Start or Stop the timer *--------------------------------------------------------------*/ #define TIMER_START_STOP(startStop) ((startStop) ? ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) |= TIMER_ST) : \ ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) &= ~TIMER_ST)) /* Prototype of the functions */ void TM_ResetTimer (SYS_UWORD16 timerNum, SYS_UWORD16 countValue, SYS_UWORD16 autoReload, SYS_UWORD16 clockScale); void TM_StopTimer (int timerNum); void TM_StartTimer (int timerNum); SYS_UWORD16 TM_ReadTimer (int timerNum); void TM_DisableWatchdog(void); void TM_EnableWatchdog(void); void TM_ResetWatchdog(SYS_UWORD16 cnt); void TM_EnableTimer (int timerNum); void TM_DisableTimer (int timerNum); SYS_UWORD16 TIMER_Read (unsigned short); void TIMER_WriteValue (SYS_UWORD16); unsigned short TIMER_ReadValue (void);