FreeCalypso > hg > fc-magnetite
view src/condat2/com/include/light_obsolete.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM (6301) | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Types definitions for the light emitting driver | . +----------------------------------------------------------------------------- */ #ifndef LIGHT_H #define LIGHT_H /* * devices */ #define LIGHT_DEVICE_BACKLIGHT 0 #define LIGHT_DEVICE_INSERVICELED 1 /* * device status */ #define LIGHT_STATUS_OFF 0 #define LIGHT_STATUS_ON 1 #define LIGHT_STATUS_DIMMED 2 #define LIGHT_STATUS_INTERMEDIATE 3 #define LIGHT_STATUS_BRIGHT 4 #define LIGHT_STATUS_GREEN 5 #define LIGHT_STATUS_ORANGE 6 #define LIGHT_STATUS_RED 7 #if defined (NEW_FRAME) /* * to achieve backward compatibility with older definitions */ #define drv_SignalCB_Type T_DRV_CB_FUNC #define drv_SignalID_Type T_DRV_SIGNAL #define T_VSI_THANDLE USHORT #endif /* * Prototypes */ EXTERN UBYTE light_Init (void); EXTERN void light_Exit (void); EXTERN UBYTE light_SetStatus (UBYTE in_DeviceID, UBYTE in_NewStatus); EXTERN UBYTE light_GetStatus (UBYTE in_DeviceID, UBYTE * in_StatusPtr); void light_setBacklightOn( void ); void light_setBacklightIdle( void ); void light_setBacklightOff( void ); #endif
