FreeCalypso > hg > fc-magnetite

view src/aci2/bmi/bmi.mak @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 93999a60b835
children
line wrap: on
line source

#
#	Setting Directory for Layer4 Objects
#
TARID := bmi
OBJ := $(CONDAT_DIR)/obj/obj_$(TARID)

#INCLAYER4 = -I$(SRCMFW)  -I$(SRCACI)  -I$(SRCSMI) -I$(SRCKSD)
INCLAYER4 = -I$(SRCMFW)  -I$(SRCACI)  -I$(SRCSMI) -I$(SRCKSD) -I$(SRCMMS)

# must not be empty. set to "-D" for no local flags.
MY_OPTIONS = -D


SRCWAP=$(CONDAT_DIR)/ms/src/wapaus
SRCEZI=$(CONDAT_DIR)/ms/src/ezitxt
SRCCE=$(CONDAT_DIR)/ms/src/agfa
SRCATB=$(CONDAT_DIR)/ms/src/atb
COLOUR_MMI = 0 
# New editor. 1 -> Compile. 0 -> Don't compile, compile old editor.
NEWED = 1


#
# Sim application setting
#

ifeq ($(TK),1)
COPT1 += -dSIM_TOOLKIT
else
COPT1 += -uSIM_TOOLKIT
endif

ifeq ($(MELGEN),1)
COPT1 += -dMMI_MELODYGENERATOR
else
COPT1 += -uMMI_MELODYGENERATOR
endif

ifeq ($(GAME),1)
COPT1 += -dMMIGAME
else
COPT1 += -uMMIGAME
endif


ifeq ($(CHIMMI),1)
COPT1+= -dCHINESE_MMI
else
COPT1+= -uCHINESE_MMI
endif


ifeq ($(ETXT),1)
COPT1 += -dEASY_TEXT_ENABLED
else
COPT1 += -uEASY_TEXT_ENABLED
endif


ifeq ($(WAP),1)
COPT1 += -dMMI_WAP_ENABLED
else
COPT1 += -uMMI_WAP_ENABLED
endif

#
# Support for Homezone

ifeq ($(HZONE),1)
COPT1 += -dMMI_HOMEZONE_ENABLED
else
COPT1 += -uMMI_HOMEZONE_ENABLED
endif


#
# Support for UNICODE
#	

ifeq ($(UNIC),1)
COPT1 += -dNO_ASCIIZ
endif

#SPR890 - SH - Test mode menu
ifeq ($(MMITEST),1)
COPT1 += -dMMI_TEST_MODE
else
COPT1 += -uMMI_TEST_MODE
endif

#
# Support for GPRS
#
ifeq ($(PMODE),2)
COPT1 += -dMMI_GPRS_ENABLED
else
COPT1 += -uMMI_GPRS_ENABLED
endif

#
# Support for light version
#
#JVJ-SPR-1298. Provisional until a new option in the .inf file is inserted.

ifeq ($(SRVC),0)
COPT1 += -dMMI_LITE
else
COPT1 += -uMMI_LITE
endif


#
# Support for ENGINEERING MODE
#
ifeq ($(EM),1)
COPT1 += -dMMI_EM_ENABLED
else
COPT1 += -uMMI_EM_ENABLED
endif


#
# Support for Colour display
#	
ifeq ($(BOARD),41)
LSCREEN = 1
COLOUR_MMI = 1
endif

ifeq ($(BOARD),40)
LSCREEN = 1
COLOUR_MMI = 1
endif

ifeq ($(SRVC),0)
COLOUR_MMI = 0
endif

ifeq ($(LSCREEN),1)
COPT1 += -dLSCREEN
else
COPT1 += -uLSCREEN
endif


ifeq ($(COLOUR_MMI),1)
COPT1 += -dCOLOURDISPLAY
else
COPT1 += -uCOLOURDISPLAY
endif

#TTY settings
ifeq ($(FF_TTY),1)
COPT1 += -dMMI_TTY_ENABLED
else
COPT1 += -uMMI_TTY_ENABLED
endif

#
# Internal Phonebook
# Currently always on
#
COPT1 += -dINT_PHONEBOOK

# temporary addition for 2TO1 stack; the assumption is that 2.1.x and 3.1 don't
# use this makefile; 2.0 and 1.0 will be on the g23m branch; so it should be 
# safe to put the 2to1 related definition here without enclosing them within 
# conditions

COPT1 += -dFF_2TO1_PS
#
# New editor (SPR#1428 - SH)
#
ifeq ($(NEWED),1)
COPT1 += -dNEW_EDITOR
else
COPT1 += -uNEW_EDITOR
endif

COREOBJ = $(OBJ)/MmiCall.$(OBJ_TAIL) \
                $(OBJ)/MmiResources.$(OBJ_TAIL) \
                $(OBJ)/MmiBlkLangDB.$(OBJ_TAIL) \
                $(OBJ)/MmiBlkManager.$(OBJ_TAIL) \
                $(OBJ)/MmiBlkResources.$(OBJ_TAIL) \
                $(OBJ)/MmiBookCallDetailsWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookCallListWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookController.$(OBJ_TAIL) \
                $(OBJ)/MmiBookDetailsWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookMenuWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookPhonebook.$(OBJ_TAIL) \
                $(OBJ)/MmiBookSDNWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookSearchWindow.$(OBJ_TAIL) \
                $(OBJ)/MmiBookServices.$(OBJ_TAIL) \
                $(OBJ)/MmiBookShared.$(OBJ_TAIL) \
                $(OBJ)/MmiBookUtils.$(OBJ_TAIL) \
		$(OBJ)/MmiDialogs.$(OBJ_TAIL) \
		$(OBJ)/MmiDummy.$(OBJ_TAIL) \
		$(OBJ)/MmiIcons.$(OBJ_TAIL) \
		$(OBJ)/MmiIdle.$(OBJ_TAIL) \
		$(OBJ)/MmiLists.$(OBJ_TAIL) \
		$(OBJ)/MmiLists2.$(OBJ_TAIL) \
		$(OBJ)/MmiMain.$(OBJ_TAIL) \
		$(OBJ)/MmiMenu.$(OBJ_TAIL) \
		$(OBJ)/MmiMmi.$(OBJ_TAIL) \
		$(OBJ)/MmiNetwork.$(OBJ_TAIL) \
		$(OBJ)/MmiPins.$(OBJ_TAIL) \
		$(OBJ)/MmiServices.$(OBJ_TAIL) \
		$(OBJ)/MmiSettings.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsBroadcast.$(OBJ_TAIL) \
		$(OBJ)/MmiSounds.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsIdle.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsMenu.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsSend.$(OBJ_TAIL) \
		$(OBJ)/MmiSmsRead.$(OBJ_TAIL) \
		$(OBJ)/MmiSoftkeys.$(OBJ_TAIL) \
		$(OBJ)/MmiStart.$(OBJ_TAIL) \
                $(OBJ)/MmiTimeDate.$(OBJ_TAIL) \
                $(OBJ)/MmiUserData.$(OBJ_TAIL)\
		$(OBJ)/MmiSatcall.$(OBJ_TAIL) \
		$(OBJ)/MmiSatinfo.$(OBJ_TAIL) \
		$(OBJ)/MmiSatinput.$(OBJ_TAIL) \
		$(OBJ)/MmiSatmenu.$(OBJ_TAIL) \
		$(OBJ)/MmiSimtoolkit.$(OBJ_TAIL) \
		$(OBJ)/MmiVoiceMemo.$(OBJ_TAIL)\
		$(OBJ)/MmiCalculatorMain.$(OBJ_TAIL) \
		$(OBJ)/MmiMelody_data.$(OBJ_TAIL) \
		$(OBJ)/MmiTimers.$(OBJ_TAIL) \
		$(OBJ)/MmiAoc.$(OBJ_TAIL) \
		$(OBJ)/MmiCPHS.$(OBJ_TAIL) \
		$(OBJ)/MmiBand.$(OBJ_TAIL) \
		$(OBJ)/MmiSatClassE.$(OBJ_TAIL) \

BMIOBJ = $(COREOBJ)

ifeq ($(NEWED),1)
NEWEDOBJ =	$(OBJ)/AUIEditor.$(OBJ_TAIL)\
		$(OBJ)/AUISymbol.$(OBJ_TAIL)\
		$(OBJ)/AUITextEntry.$(OBJ_TAIL)\
		$(OBJ)/AUICalcEditor.$(OBJ_TAIL)\
		$(OBJ)/AUIPINEditor.$(OBJ_TAIL)
else
NEWEDOBJ += $(OBJ)/MmiBookInputWindow.$(OBJ_TAIL) \
		$(OBJ)/MmiEditor.$(OBJ_TAIL)
endif
BMIOBJ += $(NEWEDOBJ)
EXTRAOBJ += $(NEWEDOBJ)
		
		
ifeq ($(HZONE),1)
BMIOBJ +=	$(OBJ)/MmiHomezone.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiHomezone.$(OBJ_TAIL)
endif

# aka GPRS
ifeq ($(PMODE),2)
BMIOBJ +=	$(OBJ)/MmiGprs.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiGprs.$(OBJ_TAIL)
endif

ifeq ($(EM),1)
BMIOBJ +=	$(OBJ)/MmiEm.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiEm.$(OBJ_TAIL)
endif
	
ifeq ($(ETXT),1)
BMIOBJ += 	$(OBJ)/MmiDictionary.$(OBJ_TAIL)
EXTRAOBJ += 	$(OBJ)/MmiDictionary.$(OBJ_TAIL)
# SH - Only compile MmiLatinPredText.c if new editor is switched OFF
ifeq ($(NEWED),0)
BMIOBJ +=	$(OBJ)/MmiLatinPredText.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/MmiLatinPredText.$(OBJ_TAIL)
endif
endif

ifeq ($(CHIMMI),1)
BMIOBJ += $(OBJ)/MmiChineseInput.$(OBJ_TAIL)
EXTRAOBJ += $(OBJ)/MmiChineseInput.$(OBJ_TAIL)
endif

ifeq ($(MELGEN),1)
BMIOBJ += 	$(OBJ)/MmiMelodygeneratorMain.$(OBJ_TAIL)
EXTRAOBJ += 	$(OBJ)/MmiMelodygeneratorMain.$(OBJ_TAIL)
endif

ifeq ($(GAME),1)
BMIOBJ += 	$(OBJ)/Mmigame.$(OBJ_TAIL)
EXTRAOBJ += 	$(OBJ)/Mmigame.$(OBJ_TAIL)
endif

ifeq ($(WAP),1)
BMIWAPOBJ =	$(OBJ)/wap_codec.$(OBJ_TAIL)
EXTRAOBJ +=	$(OBJ)/wap_codec.$(OBJ_TAIL)

WAPOBJ =	$(OBJ)/MmiWapFfs.$(OBJ_TAIL) \
		$(OBJ)/ATBWapAUI.$(OBJ_TAIL) \
		$(OBJ)/ATBWapACI.$(OBJ_TAIL) \
		$(OBJ)/AUIWap.$(OBJ_TAIL)
BMIOBJ += $(WAPOBJ)
EXTRAOBJ += $(WAPOBJ)
endif
		
#
# Creating bmi.lib
#
# Note: AR reached its limit in terms of command line length so we need to 
# split the creation of $(BMI_LIB) into 2 steps: initial creation of a new 
# library; then separate addition of "extra" objects. There are therefore 
# 2 groups of objects - one for compilation (BMIOBJ/BMIWAPOBJ), and one for 
# archiving (COREOBJ/EXTRAOBJ). AR does allow a 'command file' to be used 
# instead of the command line; however, this has its own file formatting 
# requirements and line length limits (neither of which are very clear) and
# there is no ready access to individual object file names, so the 
# "COREOBJ/EXTRAOBJ" method is used - for now. Something similar is done in 
# the ACI.

$(TOP_DIR)/$(BMI_LIB) : $(OBJ) $(COREOBJ) $(EXTRAOBJ)
	-$(PERL) $(CONDAT_DIR)/int/bin/make_ver.pl
	@cp ver.$(OBJ_TAIL) $(subst /,$(SLASH),$(OBJ)/ver.$(OBJ_TAIL))
	cd $(subst /,$(SLASH),$(OBJ)) $(DELIMITER) $(AR) r $(TOP_DIR)/$(BMI_LIB) $(patsubst $(OBJ)/%,%,$(COREOBJ))
	cd $(subst /,$(SLASH),$(OBJ)) $(DELIMITER) $(AR) r $(TOP_DIR)/$(BMI_LIB) $(patsubst $(OBJ)/%,%,$(EXTRAOBJ) ver.$(OBJ_TAIL))

$(OBJ):	
	mkdir $(subst /,$(SLASH),$(OBJ))
	
clean: 
	$(REMOVE) $(subst /,$(SLASH),$(OBJ))

$(BMIOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCBMI)/%.c
	echo -D$(NCONFIG) >  cmd
#HHV: Added FF_SAT_E for compilation of BMI. Must be removed after TCS4 merge!!!
	echo -DFF_SAT_E >> cmd
#	echo $(MY_OPTIONS) >> cmd
	echo -D$(NTRACE) >> cmd
	echo -D$(NWARN) >> cmd
	echo -DTRGT_G23 >> cmd
	echo -DAUS_CONDAT_TYPE_PORTING >> cmd
	echo -DUSE_WIP_MALLOC >> cmd
	echo $(COPT) >> cmd
	echo $(COPT1) >> cmd
	echo $(COTAR) >> cmd
	echo $(FDOPT) >> cmd
	echo $(INCDRV1) >> cmd
	echo -I$(ICOM) >> cmd
	echo $(INCDRV2) >> cmd
	echo -I$(ICDG) >> cmd
	echo -I$(IAUS) >> cmd
	echo -I$(IGLE) >> cmd
	echo -I$(IAUSC) >> cmd
	echo -I$(SRCWAP) >> cmd
	echo -I$(SRCATB) >> cmd
	echo -I$(TOP_DIR)/zi/include >> cmd
	echo $(INCLAYER4) >> cmd
	echo -I$(SRCACIEXT) >> cmd
	echo -I$(SRCACIDTI) >> cmd
	echo -fr$(OBJ) >> cmd
	$(CC_PRE) $^ -@cmd
	$(CC_INT) $(addsuffix .pp,$(basename $^))
	$(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd

$(BMIWAPOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCWAP)/%.c
	echo -D$(NCONFIG) >  cmd
#	echo $(MY_OPTIONS) >> cmd
	echo -D$(NTRACE) >> cmd
	echo -D$(NWARN) >> cmd
	echo -DTRGT_G23 >> cmd
	echo -DAUS_CONDAT_TYPE_PORTING >> cmd
	echo $(COPT) >> cmd
	echo $(COPT1) >> cmd
	echo $(COTAR) >> cmd
	echo $(FDOPT) >> cmd
	echo $(INCDRV1) >> cmd
	echo -I$(ICOM) >> cmd
	echo $(INCDRV2) >> cmd
	echo -I$(ICDG) >> cmd
	echo -I$(IAUS) >> cmd
	echo -I$(IAUSC) >> cmd
	echo -I$(IGLE) >> cmd
	echo -I$(SRCWAP) >> cmd
	echo -I$(SRCATB) >> cmd
	echo $(INCLAYER4) >> cmd
	echo -I$(SRCACIEXT) >> cmd
	echo -I$(SRCACIDTI) >> cmd
	echo -fr$(OBJ) >> cmd
	$(CC_PRE) $^ -@cmd
	$(CC_INT) $(addsuffix .pp,$(basename $^))
	$(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd

# files to be added for MMS
# $(OBJ)/MmiMMSMenu.$(OBJ_TAIL) \
# $(OBJ)/MmiEMSCreate.$(OBJ_TAIL) \
# $(OBJ)/MmiMMSCreate.$(OBJ_TAIL) \
# $(OBJ)/MmiMMSBox.$(OBJ_TAIL) \
# $(OBJ)/Auiwapmms.$(OBJ_TAIL) \
# $(OBJ)/MmiMMSom.$(OBJ_TAIL) \
# $(OBJ)/MmiWindow.$(OBJ_TAIL) \
# $(OBJ)/MmiMmsSetting.$(OBJ_TAIL) 
# $(OBJ)/AUIWap.$(OBJ_TAIL)\
# $(OBJ)/AUIWapPush.$(OBJ_TAIL)
# $(OBJ)/MmiMP3Test.$(OBJ_TAIL)