FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_udpa.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | e7a67accfad9 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_udpa.h | | SOURCE : "sap\udpa.pdf" | | LastModified : "2003-08-26" | | IdAndVersion : "8444.103.02.006" | | SrcFileTime : "Thu Nov 29 09:56:38 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_UDPA_H #define P_UDPA_H #define CDG_ENTER__P_UDPA_H #define CDG_ENTER__FILENAME _P_UDPA_H #define CDG_ENTER__P_UDPA_H__FILE_TYPE CDGINC #define CDG_ENTER__P_UDPA_H__LAST_MODIFIED _2003_08_26 #define CDG_ENTER__P_UDPA_H__ID_AND_VERSION _8444_103_02_006 #define CDG_ENTER__P_UDPA_H__SRC_FILE_TIME _Thu_Nov_29_09_56_38_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_UDPA_H #undef CDG_ENTER__FILENAME #include "p_udpa.val" /* * End of substructure section, begin of primitive definition section */ #ifndef __T_UDPA_DTI_REQ__ #define __T_UDPA_DTI_REQ__ /* * * CCDGEN:WriteStruct_Count==3152 */ typedef struct { U8 dti_conn; /*< 0: 1> DTI2 connect */ U8 entity_name[UDPA_ENTITY_NAME_LEN]; /*< 1: 6> name of an neighbour entity */ U8 _align0; /*< 7: 1> alignment */ U32 link_id; /*< 8: 4> Link identifier */ U8 dti_direction; /*< 12: 1> DTI2 direction */ U8 _align1; /*< 13: 1> alignment */ U8 _align2; /*< 14: 1> alignment */ U8 _align3; /*< 15: 1> alignment */ } T_UDPA_DTI_REQ; #endif #ifndef __T_UDPA_DTI_CNF__ #define __T_UDPA_DTI_CNF__ /* * * CCDGEN:WriteStruct_Count==3153 */ typedef struct { U8 dti_conn; /*< 0: 1> DTI2 connect */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ U32 link_id; /*< 4: 4> Link identifier */ } T_UDPA_DTI_CNF; #endif #ifndef __T_UDPA_DTI_IND__ #define __T_UDPA_DTI_IND__ /* * * CCDGEN:WriteStruct_Count==3154 */ typedef struct { U32 link_id; /*< 0: 4> Link identifier */ } T_UDPA_DTI_IND; #endif #ifndef __T_UDPA_CONFIG_REQ__ #define __T_UDPA_CONFIG_REQ__ /* * * CCDGEN:WriteStruct_Count==3155 */ typedef struct { U8 cmd; /*< 0: 1> command */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ } T_UDPA_CONFIG_REQ; #endif #ifndef __T_UDPA_CONFIG_CNF__ #define __T_UDPA_CONFIG_CNF__ /* * * CCDGEN:WriteStruct_Count==3156 */ typedef struct { U8 dummy; /*< 0: 1> no parameters */ } T_UDPA_CONFIG_CNF; #endif #include "CDG_LEAVE.h" #endif