FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_udp.val @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_udp.val                                                      |
| SOURCE  : "sap\udp.pdf"                                                  |
| LastModified : "2003-08-26"                                              |
| IdAndVersion : "8444.100.00.006"                                         |
| SrcFileTime  : "Thu Nov 29 09:56:22 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_UDP_VAL
#define P_UDP_VAL


#define CDG_ENTER__P_UDP_VAL

#define CDG_ENTER__FILENAME _P_UDP_VAL
#define CDG_ENTER__P_UDP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_UDP_VAL__LAST_MODIFIED _2003_08_26
#define CDG_ENTER__P_UDP_VAL__ID_AND_VERSION _8444_100_00_006

#define CDG_ENTER__P_UDP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_56_22_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_UDP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_port
 */
#define UDP_AUTOASSIGN_PORT            (0x0)      /* UDP must assign a free port number */

/*
 * Value constants for VAL_err
 */
#define UDP_BIND_NOERROR               (0x0)      /* no error                       */
#define UDP_BIND_PORTINUSE             (0x1)      /* port already in use            */
#define UDP_BIND_UDPDOWN               (0x2)      /* udp is deactivated             */

#include "CDG_LEAVE.h"


#endif