FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_gsmcom.val @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsmcom.val                                                   |
| SOURCE  : "sap\gsmcom.pdf"                                               |
| LastModified : "2002-10-04"                                              |
| IdAndVersion : "8443.100.02.008"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:26 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSMCOM_VAL
#define P_GSMCOM_VAL


#define CDG_ENTER__P_GSMCOM_VAL

#define CDG_ENTER__FILENAME _P_GSMCOM_VAL
#define CDG_ENTER__P_GSMCOM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSMCOM_VAL__LAST_MODIFIED _2002_10_04
#define CDG_ENTER__P_GSMCOM_VAL__ID_AND_VERSION _8443_100_02_008

#define CDG_ENTER__P_GSMCOM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_26_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSMCOM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gsmcom_dummy
 */

/*
 * user defined constants
 */
#define SIM_ORIGINATING_ENTITY         (0x0)      
#define ACI_ORIGINATING_ENTITY         (0x1)      
#define RLP_ORIGINATING_ENTITY         (0x2)      
#define RR_ORIGINATING_ENTITY          (0x3)      
#define MM_ORIGINATING_ENTITY          (0x4)      
#define CC_ORIGINATING_ENTITY          (0x5)      
#define SS_ORIGINATING_ENTITY          (0x6)      
#define SMSCP_ORIGINATING_ENTITY       (0x7)      
#define SMSRP_ORIGINATING_ENTITY       (0x8)      
#define SMSTP_ORIGINATING_ENTITY       (0x9)      
#define GMM_ORIGINATING_ENTITY         (0xa)      
#define SM_ORIGINATING_ENTITY          (0xb)      
#define FAD_ORIGINATING_ENTITY         (0xc)      
#define T30_ORIGINATING_ENTITY         (0xd)      
#define GRR_ORIGINATING_ENTITY         (0xe)      
#define PPP_ORIGINATING_ENTITY         (0xf)      
#define LLC_ORIGINATING_ENTITY         (0x10)     
#define SNDCP_ORIGINATING_ENTITY       (0x11)     
#define PKTIO_ORIGINATING_ENTITY       (0x12)     
#define PSI_ORIGINATING_ENTITY         (0x13)     

#include "CDG_LEAVE.h"


#endif