view cdg-hybrid/cdginc/p_gsim.val @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsim.val                                                     |
| SOURCE  : "sap\gsim.pdf"                                                 |
| LastModified : "2003-02-04"                                              |
| IdAndVersion : "8441.113.99.004"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:12 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSIM_VAL
#define P_GSIM_VAL


#define CDG_ENTER__P_GSIM_VAL

#define CDG_ENTER__FILENAME _P_GSIM_VAL
#define CDG_ENTER__P_GSIM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSIM_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__P_GSIM_VAL__ID_AND_VERSION _8441_113_99_004

#define CDG_ENTER__P_GSIM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_12_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSIM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gu
 */
#define GSIM_GU_NA                     (0x0)      /* GPRS update status not applicable (i.e. this parameter shall be ignored) */
#define GSIM_GU1_UPDATED               (0x1)      /* last GPRS attach or RAU attempt successful */
#define GSIM_GU2_NOT_UPDATED           (0x2)      /* last GPRS attach or RAU attempt failed procedurally */
#define GSIM_GU3_ROAMING_NOT_ALLOWED   (0x3)      /* last GPRS attach or RAU attempt correctly performed, but negative answer from network received */

/*
 * Value constants for VAL_tmsi
 */
#define GSIM_TMSI_INVALID              (0xffffffff)/* P-TMSI invalid (see GSM 3.03)  */

/*
 * Value constants for VAL_ptmsi_signature_flag
 */
#define GSIM_PTMSI_SIG_DEL             (0x0)      /* P-TMSI Dignature shall be deleted */
#define GSIM_PTMSI_SIG_VALID           (0x1)      /* P-TMSI Signature is valid      */
#define GSIM_PTMSI_SIG_NA              (0x2)      /* P-TMSI Signature not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_gsim_cksn
 */
#define GSIM_CKSN_NA                   (0x0)      /* GPRS ciphering key sequence number not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_sim_gprs_invalid
 */
#define GSIM_SIM_GPRS_NA               (0x0)      /* not applicable (i.e. this parameter shall be ignored) */
#define GSIM_SIM_GPRS_VALID            (0x1)      /* SIM is considered as valid for GPRS */
#define GSIM_SIM_GPRS_INVALID          (0x2)      /* SIM is considered as invalid for GPRS */

/*
 * user defined constants
 */
#define GSIM_PTMSI_NA                  (0xffffffff)
#define SIZE_SRES                      (0x4)      
#define SIZE_KC                        (0x8)      
#define SIZE_RAND                      (0x10)     
#define MAX_IMSI                       (0x9)      

#include "CDG_LEAVE.h"


#endif