view cdg-hybrid/cdginc/p_dti2.val @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti2.val                                                     |
| SOURCE  : "sap\dti2.pdf"                                                 |
| LastModified : "2001-09-19"                                              |
| IdAndVersion : "8411.111.01.002"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:38 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI2_VAL
#define P_DTI2_VAL


#define CDG_ENTER__P_DTI2_VAL

#define CDG_ENTER__FILENAME _P_DTI2_VAL
#define CDG_ENTER__P_DTI2_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI2_VAL__LAST_MODIFIED _2001_09_19
#define CDG_ENTER__P_DTI2_VAL__ID_AND_VERSION _8411_111_01_002

#define CDG_ENTER__P_DTI2_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_38_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI2_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_version
 */
#define DTI_VERSION_10                 (0x1)      /* version 1.0                    */

/*
 * Value constants for VAL_cause
 */
#define DTI_CAUSE_NORMAL_CLOSE         (0x0)      /* connection is closed by the entity */
#define DTI_CAUSE_UNEXPECTED_PRIMITIVE (0x1)      /* unexpected primitive received  */
#define DTI_CAUSE_UNSUPPORTED_VERSION  (0x2)      /* negotiated version is not supported */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_UOS                    (0x0)      /* unstructured octet stream      */

/*
 * Value constants for VAL_st_break_len
 */
#define DTI_BREAK_OFF                  (0x0)      /* No break detected              */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

#include "CDG_LEAVE.h"


#endif