view cdg-hybrid/cdginc/p_dti.val @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti.val                                                      |
| SOURCE  : "sap\dti.pdf"                                                  |
| LastModified : "2000-06-29"                                              |
| IdAndVersion : "8411.110.00.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:22 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI_VAL
#define P_DTI_VAL


#define CDG_ENTER__P_DTI_VAL

#define CDG_ENTER__FILENAME _P_DTI_VAL
#define CDG_ENTER__P_DTI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI_VAL__LAST_MODIFIED _2000_06_29
#define CDG_ENTER__P_DTI_VAL__ID_AND_VERSION _8411_110_00_007

#define CDG_ENTER__P_DTI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_22_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_c_id
 */
#define DTI_NSAPI_0                    (0x0)      /* escape mechanism for future extensions */
#define DTI_NSAPI_1                    (0x1)      /* Point-To-Multipoint Multicast information */
#define DTI_NSAPI_2                    (0x2)      /* reserved for future use        */
#define DTI_NSAPI_3                    (0x3)      /* reserved for future use        */
#define DTI_NSAPI_4                    (0x4)      /* reserved for future use        */
#define DTI_NSAPI_5                    (0x5)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_6                    (0x6)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_7                    (0x7)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_8                    (0x8)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_9                    (0x9)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_10                   (0xa)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_11                   (0xb)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_12                   (0xc)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_13                   (0xd)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_14                   (0xe)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_15                   (0xf)      /* dynamically allocated NSAPI value */
#define DTI_C_ID_DEFAULT               (0x5)      /* Default value for c_id         */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_FRAME                  (0x0)      /* PPP frame                      */

/*
 * Value constants for VAL_op_ack
 */
#define OP_ACK                         (0x1)      /* acknowledged operation mode    */
#define OP_UNACK                       (0x0)      /* unacknowledged operation mode  */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

/*
 * Value constants for VAL_st_escape
 */
#define DTI_ESC_OFF                    (0x0)      /* No escape detected             */
#define DTI_ESC_ON                     (0x1)      /* Escape detected                */

#include "CDG_LEAVE.h"


#endif