FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_8010_157_upm_sap.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_8010_157_upm_sap.h | | SOURCE : "sap\8010_157_upm_sap.pdf" | | LastModified : "2004-01-19" | | IdAndVersion : "8010.157.04.003" | | SrcFileTime : "Thu Nov 29 09:29:28 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : UPM * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: YES * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_8010_157_UPM_SAP_H #define P_8010_157_UPM_SAP_H #define CDG_ENTER__P_8010_157_UPM_SAP_H #define CDG_ENTER__FILENAME _P_8010_157_UPM_SAP_H #define CDG_ENTER__P_8010_157_UPM_SAP_H__FILE_TYPE CDGINC #define CDG_ENTER__P_8010_157_UPM_SAP_H__LAST_MODIFIED _2004_01_19 #define CDG_ENTER__P_8010_157_UPM_SAP_H__ID_AND_VERSION _8010_157_04_003 #define CDG_ENTER__P_8010_157_UPM_SAP_H__SRC_FILE_TIME _Thu_Nov_29_09_29_28_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_8010_157_UPM_SAP_H #undef CDG_ENTER__FILENAME #include "p_8010_157_upm_sap.val" #include "p_8010_137_nas_include.h" /* * End of substructure section, begin of primitive definition section */ #ifndef __T_UPM_DTI_REQ__ #define __T_UPM_DTI_REQ__ /* * * CCDGEN:WriteStruct_Count==1390 */ typedef struct { U8 nsapi; /*< 0: 1> T_NAS_nsapi, network layer service access point identifier */ U8 dti_conn; /*< 1: 1> T_NAS_dti_conn, DTI connect */ U8 dti_direction; /*< 2: 1> T_NAS_dti_direction, direction of DTI connection */ U8 _align0; /*< 3: 1> alignment */ U32 dti_linkid; /*< 4: 4> DTI link identifier */ T_NAS_dti_neighbor dti_neighbor; /*< 8: 8> DTI neighbor entity name (type defined in "p_8010_137_nas_include.h") */ } T_UPM_DTI_REQ; #endif #ifndef __T_UPM_DTI_CNF__ #define __T_UPM_DTI_CNF__ /* * * CCDGEN:WriteStruct_Count==1391 */ typedef struct { U32 dti_linkid; /*< 0: 4> DTI link identifier */ U8 dti_conn; /*< 4: 1> T_NAS_dti_conn, DTI connect */ U8 _align0; /*< 5: 1> alignment */ U8 _align1; /*< 6: 1> alignment */ U8 _align2; /*< 7: 1> alignment */ } T_UPM_DTI_CNF; #endif #ifndef __T_UPM_COUNT_REQ__ #define __T_UPM_COUNT_REQ__ /* * * CCDGEN:WriteStruct_Count==1392 */ typedef struct { U8 nsapi; /*< 0: 1> T_NAS_nsapi, network layer service access point identifier */ U8 reset; /*< 1: 1> T_NAS_reset, reset flag */ U8 _align0; /*< 2: 1> alignment */ U8 _align1; /*< 3: 1> alignment */ } T_UPM_COUNT_REQ; #endif #ifndef __T_UPM_COUNT_CNF__ #define __T_UPM_COUNT_CNF__ /* * * CCDGEN:WriteStruct_Count==1393 */ typedef struct { U8 nsapi; /*< 0: 1> T_NAS_nsapi, network layer service access point identifier */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ U32 octets_uplink; /*< 4: 4> octets uplink */ U32 octets_downlink; /*< 8: 4> octets downlink */ U32 packets_uplink; /*< 12: 4> packets uplink */ U32 packets_downlink; /*< 16: 4> packets downlink */ } T_UPM_COUNT_CNF; #endif #include "CDG_LEAVE.h" #endif