view cdg-hybrid/cdginc/p_8010_136_simdrv_sap.val @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_136_simdrv_sap.val                                      |
| SOURCE  : "sap\8010_136_SIMDRV_SAP.pdf"                                  |
| LastModified : "2004-06-10"                                              |
| IdAndVersion : "8010.136.03.009"                                         |
| SrcFileTime  : "Thu Nov 29 09:27:56 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : SIMDRV
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: YES
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_136_SIMDRV_SAP_VAL
#define P_8010_136_SIMDRV_SAP_VAL


#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_136_SIMDRV_SAP_VAL
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__LAST_MODIFIED _2004_06_10
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__ID_AND_VERSION _8010_136_03_009

#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_56_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Enum to value table VAL_reset_return_val
 * CCDGEN:WriteEnum_Count==29
 */
#ifndef __T_SIMDRV_VAL_reset_return_val__
#define __T_SIMDRV_VAL_reset_return_val__
typedef enum
{
  SIMDRV_SIM_INSERTED            = 0x0,           /* A SIM is inserted and ATR/PPS was successful */
  SIMDRV_SIM_NOT_INSERTED        = 0x1,           /* No SIM inserted (hardware detected) */
  SIMDRV_INVALID_CARD            = 0x2,           /* Card is not responding or gives unintelligible answers, communications time out. */
  SIMDRV_ME_FAILURE              = 0x3,           /* Power management related problems, e.g. voltage selection */
  SIMDRV_IMPROPER_CALL_BACK      = 0x4,           /* simdrv_register function called with pointer improperly set, e.g. NULL. */
  SIMDRV_ME_READER_NOT_AVAILABLE = 0x5            /* The reader requested is not available */
}T_SIMDRV_VAL_reset_return_val;
#endif

/*
 * Enum to value table VAL_len
 * CCDGEN:WriteEnum_Count==31
 */
#ifndef __T_SIMDRV_VAL_len__
#define __T_SIMDRV_VAL_len__
typedef enum
{
  SIMDRV_VAL_LEN__RANGE_MIN      = 0x0,           /* minimum                        */
  SIMDRV_VAL_LEN__RANGE_MAX      = 0x100,         /* maximum                        */
  SIMDRV_LENGTH_UNKNOWN          = 0xffff         /* Indicating that the length expected is unknown. */
}T_SIMDRV_VAL_len;
#endif

/*
 * Enum to value table VAL_sw1_2
 * CCDGEN:WriteEnum_Count==33
 */
#ifndef __T_SIMDRV_VAL_sw1_2__
#define __T_SIMDRV_VAL_sw1_2__
typedef enum
{
  SIMDRV_ERR_NOCARD              = 0x1,           /* No SIM inserted (hardware detected) */
  SIMDRV_ERR_NOT_RESET           = 0x2,           /* A reset has not been performed on the driver with the requested Id. */
  SIMDRV_ERR_ME_FAIL             = 0x3,           /* Unrecoverable ME failure (for instance interrupt fails to occur) */
  SIMDRV_ERR_RETRY_FAIL          = 0x4,           /* ME/SIM communication failed after certain retries, SIM reset required */
  SIMDRV_ERR_PARAM_WRONG         = 0x5            /* A driver function is called with invalid parameters */
}T_SIMDRV_VAL_sw1_2;
#endif

/*
 * Enum to value table VAL_cla
 * CCDGEN:WriteEnum_Count==35
 */
#ifndef __T_SIMDRV_VAL_cla__
#define __T_SIMDRV_VAL_cla__
typedef enum
{
  SIMDRV_GSM_CLASS_BYTE          = 0xa0,          /* GSM Class byte according to [GSM 11.11 / 3GPP 51.011] */
  SIMDRV_UMTS_CLASS_BYTE         = 0x80,          /* UMTS Class byte according to [ETSI 102 221 10.1.2] */
  SIMDRV_UICC_CLASS_BYTE         = 0x0            /* UICC Class byte according to [ISO 7816-4] */
}T_SIMDRV_VAL_cla;
#endif

/*
 * Enum to value table VAL_ins
 * CCDGEN:WriteEnum_Count==37
 */
#ifndef __T_SIMDRV_VAL_ins__
#define __T_SIMDRV_VAL_ins__
typedef enum
{
  SIMDRV_INS_SELECT              = 0xa4,          /* Select Instruction             */
  SIMDRV_INS_STATUS              = 0xf2,          /* Status Instruction             */
  SIMDRV_INS_READ_BINARY         = 0xb0,          /* Read Binary Instruction        */
  SIMDRV_INS_UPDATE_BINARY       = 0xd6,          /* Update Binary Instruction      */
  SIMDRV_INS_READ_RECORD         = 0xb2,          /* Read Record Instruction        */
  SIMDRV_INS_UPDATE_RECORD       = 0xdc,          /* Update Record Instruction      */
  SIMDRV_INS_SEEK                = 0xa2,          /* Seek Instruction               */
  SIMDRV_INS_INCREASE            = 0x32,          /* Increase Instruction           */
  SIMDRV_INS_VERIFY_CHV          = 0x20,          /* Verify Chv Instruction         */
  SIMDRV_INS_CHANGE_CHV          = 0x24,          /* Change Chv Instruction         */
  SIMDRV_INS_DISABLE_CHV         = 0x26,          /* Disable Chv Instruction        */
  SIMDRV_INS_ENABLE_CHV          = 0x28,          /* Ensable Chv Instruction        */
  SIMDRV_INS_UNBLOCK_CHV         = 0x2c,          /* Unblock Chv Instruction        */
  SIMDRV_INS_INVALIDATE          = 0x4,           /* Invalidate Instruction         */
  SIMDRV_INS_REHABILITATE        = 0x44,          /* Rehabilitate Instruction       */
  SIMDRV_INS_AUTHENTICATE        = 0x88,          /* Run GSM Algorithm (2/2.5G) / Authenticate (3G) Instruction */
  SIMDRV_INS_TERMINAL_PROFILE    = 0x10,          /* Terminal Profile Instruction   */
  SIMDRV_INS_ENVELOPE            = 0xc2,          /* Envelope Instruction           */
  SIMDRV_INS_FETCH               = 0x12,          /* Fetch Instruction              */
  SIMDRV_INS_TERMINAL_RESPONSE   = 0x14,          /* Terminal Response Instruction  */
  SIMDRV_INS_GET_RESPONSE        = 0xc0           /* Get Response Instruction       */
}T_SIMDRV_VAL_ins;
#endif

/*
 * Enum to value table VAL_voltage_select
 * CCDGEN:WriteEnum_Count==39
 */
#ifndef __T_SIMDRV_VAL_voltage_select__
#define __T_SIMDRV_VAL_voltage_select__
typedef enum
{
  SIMDRV_REQ_VOLTAGE_SEL         = 0x0,           /* The SIM reader driver shall perform voltage selection */
  SIMDRV_OMIT_VOLTAGE_SEL        = 0x1            /* The SIM reader driver shall restart with the current voltage */
}T_SIMDRV_VAL_voltage_select;
#endif

/*
 * Enum to value table VAL_config_requested
 * CCDGEN:WriteEnum_Count==41
 */
#ifndef __T_SIMDRV_VAL_config_requested__
#define __T_SIMDRV_VAL_config_requested__
typedef enum
{
  SIMDRV_OMIT_CONFIG_CHARACTERISTICS = 0x0,       /* PS Shall not retrieve Configuration Characteristics */
  SIMDRV_REQUEST_CONFIG_CHARACTERISTICS = 0x1     /* PS Shall retrieve Configuration Characteristics */
}T_SIMDRV_VAL_config_requested;
#endif

/*
 * Enum to value table VAL_reader_id
 * CCDGEN:WriteEnum_Count==43
 */
#ifndef __T_SIMDRV_VAL_reader_id__
#define __T_SIMDRV_VAL_reader_id__
typedef enum
{
  SIMDRV_VAL_READER_ID__RANGE_MIN = 0x1,          /* minimum                        */
  SIMDRV_VAL_READER_ID__RANGE_MAX = 0x2           /* maximum                        */
}T_SIMDRV_VAL_reader_id;
#endif

/*
 * user defined constants
 */
#define SIMDRV_SIZE_ATR_INFO           (0x21)     
#define SIMDRV_MIN_RESULT              (0x1)      
#define SIMDRV_MAX_RESULT              (0x100)    
#define SIMDRV_MIN_DATA_SIZE           (0x1)      
#define SIMDRV_MAX_DATA_SIZE           (0xff)     
#define SIMDRV_MAX_READERS             (0x2)      

#include "CDG_LEAVE.h"


#endif