FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_8010_135_sn_sap.val @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_8010_135_sn_sap.val | | SOURCE : "sap\8010_135_sn_sap.pdf" | | LastModified : "2004-06-08" | | IdAndVersion : "8010.135.04.012" | | SrcFileTime : "Thu Nov 29 09:27:14 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : SN * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: YES * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_8010_135_SN_SAP_VAL #define P_8010_135_SN_SAP_VAL #define CDG_ENTER__P_8010_135_SN_SAP_VAL #define CDG_ENTER__FILENAME _P_8010_135_SN_SAP_VAL #define CDG_ENTER__P_8010_135_SN_SAP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_8010_135_SN_SAP_VAL__LAST_MODIFIED _2004_06_08 #define CDG_ENTER__P_8010_135_SN_SAP_VAL__ID_AND_VERSION _8010_135_04_012 #define CDG_ENTER__P_8010_135_SN_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_14_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_8010_135_SN_SAP_VAL #undef CDG_ENTER__FILENAME #include "p_8010_137_nas_include.val" /* Access values independent from the corresponding h-file. */ #include "p_8010_152_ps_include.val" /* Access values independent from the corresponding h-file. */ #include "p_8010_153_cause_include.val" /* Access values independent from the corresponding h-file. */ /* * Enum to value table VAL_establish * CCDGEN:WriteEnum_Count==28 */ #ifndef __T_SN_VAL_establish__ #define __T_SN_VAL_establish__ typedef enum { SN_ACTIVE_ESTABLISHMENT = 0x0, /* SNDCP shall send LL_ESTABLISH_REQ */ SN_PASSIVE_ESTABLISHMENT = 0x1 /* SNDCP shall wait for LL_ESTABLISH_IND */ }T_SN_VAL_establish; #endif /* * user defined constants */ #define SN_MAX_UL_PDU (0xff) #define SN_SIZE_NSAPI (0x10) #include "CDG_LEAVE.h" #endif