view src/g23m-aci/aci/dcm_state.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Description :  DCM instance is a state machine with several possible states.
|                 Based on the current state, DCM handle different kind of messages/events.
|                 States are listed in the order they should normally be sequenced.
+-----------------------------------------------------------------------------
*/

#ifndef __DCMSTATE_H__
#define __DCMSTATE_H__

/**
 * DCM states.
 *
 * DCM instance is a state machine with several possible states.
 * Based on the current state, DCM handle different kind of messages/events.
 * States are listed in the order they should normally be sequenced.
 *
 * See the Readme file for a description of the state machine.
 */
typedef enum
{
	DCM_OFF,
	DCM_IDLE,
	DCM_ACTIVATING_CONN,
	DCM_CONN_ACTIVATED,
	DCM_CLOSING_CONN
} T_DCM_INTERNAL_STATE;


/**
 * DCM substates.
 *
 * DCM instance is a state machine with several possible states.
 * Substates are included in some states.
 */

typedef enum
{
  DCM_SUB_NO_ACTION = 0,                            /* ALL */
  DCM_SUB_WAIT_CGATT_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_CGACT_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_SATDN_CNF,                           /* DCM_ACTIVATING_CONN */
  DCM_SUB_WAIT_SATH_CNF,                            /* DCM_CLOSING_CONN    */
  DCM_SUB_WAIT_CGDEATT_CNF,                         /* DCM_CLOSING_CONN    */
  DCM_SUB_WAIT_CGDEACT_CNF                          /* DCM_CLOSING_CONN    */
} T_DCM_INTERNAL_SUBSTATE;


T_DCM_RET dcm_idle (T_DCM_HDR * msg_p);
T_DCM_RET dcm_activating_conn(T_DCM_HDR * msg_p);
T_DCM_RET dcm_conn_activated(T_DCM_HDR * msg_p);
T_DCM_RET dcm_closing_conn(T_DCM_HDR * msg_p );

T_DCM_RET dcm_new_state(U8 state, U8 substate);
T_DCM_RET dcm_save_state(void);
T_DCM_RET dcm_restore_state(void);
void dcm_dispay_state(U8 state, U8 substate);
void dcm_dispay_sub_state(U8 substate_1, U8 substate_2);


#endif