FreeCalypso > hg > fc-magnetite

view src/g23m-aci/aci/cmh_uart.h @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_UART
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_UART_H
#define CMH_UART_H


EXTERN T_ACI_LIST *uart_src_params;
EXTERN T_ACI_LIST *uart_com_par;

/*==== CONSTANTS ==================================================*/
#define NOT_SUPPORTED_UART_IO_PA_MARK 4 /* the UART does not support parity mark directly */

/*==== TYPES ======================================================*/

typedef struct
{
  UBYTE         *data;
  USHORT        data_len;
  T_ACI_CMD_SRC srcId;
} T_ACI_DTI_SEND;

typedef T_comPar T_ACI_UART_COM_PAR;
typedef struct {
  UBYTE               device;
  T_ACI_UART_COM_PAR  comPar;
  
} T_ACI_DEVICE_ENTRY;



/*==== PROTOTYPES =================================================*/

/*==== EXPORT =====================================================*/
EXTERN void           timeout_PlusIPR (void);

EXTERN BOOL           cmhUART_CMUX (T_ACI_CMD_SRC srcId);

EXTERN void           cmhUART_lst_init (void);
EXTERN BOOL           cmhUARTtest_srcId (UBYTE srcId,
                                         void *elem);

EXTERN BOOL           cmhUARTtest_device (UBYTE device,
                                          void *elem);

EXTERN T_ACI_DTI_PRC *cmhUART_find_dlci (T_ACI_LIST *search_list,
                                         UBYTE device,
                                         UBYTE dlci );
EXTERN void cmhUART_startConnection (UBYTE srcId, 
                                      T_ACI_DEVICE_TYPE device_type);

EXTERN BOOL cmhUART_stopConnection (UBYTE srcId);
EXTERN void cmhUART_getdata ( T_ACI_CMD_SRC srcId );

EXTERN void cmhUART_ParmsUpdated( UBYTE device );
EXTERN void cmhUART_DetectedESC_DTR( UBYTE device, UBYTE dlci, UBYTE cause );
EXTERN void cmhUART_init_ipr_params(void);

/*
 *  functions for cotroling UART parameters (baud rate, character framing, flow control)
 */
EXTERN void cmhUART_AddDeviceToComParameter( UBYTE device );
EXTERN void cmhUART_CleanComParameterList( void );

EXTERN T_ACI_DEVICE_TYPE cmhUART_GetDeviceType( UBYTE srcId );
EXTERN BOOL cmhUART_ChangeDeviceType( UBYTE             srcId, 
                                      T_ACI_DEVICE_TYPE device_type );
EXTERN T_ACI_DEVICE_ENTRY* cmhUART_GetDeviceParOverDevice( UBYTE device );
EXTERN T_ACI_DEVICE_ENTRY* cmhUART_GetDeviceParOverSrcID( UBYTE srcId );
EXTERN void cmhUART_SetComParToUnchanged( T_comPar *comPar );
EXTERN T_ACI_RETURN cmhUART_SetDataRate ( UBYTE srcId, T_ACI_BD_RATE  rate);
EXTERN T_ACI_RETURN cmhUART_SetCharacterFraming ( UBYTE srcId, 
                                                  T_ACI_BS_FRM format, 
                                                  T_ACI_BS_PAR parity );
EXTERN T_ACI_RETURN cmhUART_SetFlowControl(UBYTE srcId, T_ACI_RX_FLOW_CTRL DCE_by_DTE);
EXTERN T_ACI_BS_FRM cmhUART_GetFktInterfaceFormat( T_ACI_UART_COM_PAR *comPar );
EXTERN T_ACI_BS_PAR cmhUART_GetFktInterfaceParity( T_ACI_UART_COM_PAR *comPar );

EXTERN UBYTE cmhUART_GetParityOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhUART_GetDataBitOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhUART_GetStopBitOverSrcID( UBYTE srcId );
EXTERN void  cmhUART_lst_exit (void);


#ifdef CMH_UARTF_C

GLOBAL T_ACI_AT_CMD uartEntcurCmd[CMD_SRC_MAX];

#else

EXTERN T_ACI_AT_CMD uartEntcurCmd[];

#endif /* CMH_UARTF_C */

#endif /* CMH_UART_H */

/*==== EOF =======================================================*/