view src/g23m-aci/aci/ati_omcompat.c @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 5e39123540e6
children
line wrap: on
line source

/*
 * This module implements those AT commands that were originally invented
 * by Openmoko and have been retained in FreeCalypso.
 */

#ifndef ATI_OMCOMPAT_C
#define ATI_OMCOMPAT_C

#include "aci_all.h"

#include <ctype.h>
#include <string.h>

#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci_io.h"
#include "aci_cmd.h"
#include "l4_tim.h"
#include "line_edit.h"
#include "aci_lst.h"

#include "pcm.h"
#include "audio.h"
#include "aci.h"
#include "rx.h"
#include "pwr.h"
#include "l4_tim.h"

#ifdef GPRS
#ifdef DTI
#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#endif /* DTI */
#include "gaci.h"
#include "gaci_cmh.h"
#include "gaci_cmd.h"
#endif  /* GPRS */

#include "aci_mem.h"
#include "aci_prs.h"

#include "ati_int.h"

#ifndef _SIMULATION_
#include "ffs/ffs.h"
#endif

#ifdef FF_ATI_BAT

#include "typedefs.h"
#include "gdd.h"
#include "bat.h"

#include "ati_bat.h"

#endif /*FF_ATI_BAT*/

#include "audio/audio_api.h"
#include "abb.h"
#include "dar/dar_api.h"

EXTERN void alr_get_band_of_serving_cell (char *strbuf);

/*
 * PURPOSE : @ST command (Configure the sidetone level)
 */
GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId)
{
	char tmp[8]={0};
	INT8 gain = -26;
	TRACE_FUNCTION("atAtST()");

	/*
	 * input functionality
	 */
	cl = parse(cl,"s", (LONG)8, tmp);

	gain = atoi(tmp);

	if ( cl )
	{
		if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 )
		{
			Side_Tone_Write(gain);
			return (ATI_CMPL);
		}
		else
		{
			cmdCmsError(CMS_ERR_OpNotAllowed);
			return (ATI_FAIL);
		}
	}
}

GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId)
{
	char *me="+ST: ";
	INT8 ST1;

	TRACE_FUNCTION("queatAtST()");

	ST1 = Side_Tone_Read();

	sprintf(g_sa,"%s%d",me,ST1);

	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	return (ATI_CMPL);
}

/*
 * PURPOSE : @POFF command (Power Off GSM Modem)
 */
 
GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtPOFF");

	sprintf(g_sa,"%s","OK");
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	ABB_Power_Off();

	return (ATI_CMPL);
}

/*
 * PURPOSE : @RST command (Reset GSM Modem)
 */
 
GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtRST");

	dar_reset_system();

	return (ATI_CMPL);
}

/*
 * PURPOSE : @BAND command (Get RF band)
 */

GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtBAND");			
	alr_get_band_of_serving_cell(g_sa);
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	return (ATI_CMPL);
}

#endif /* ATI_OMCOMPAT_C */