FreeCalypso > hg > fc-magnetite
view src/cs/services/dar/dar_const_i.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: dar_const_i.h */ /* */ /* Purpose: Internal constants used by DAR instance */ /* */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 26 Septembre 2001 Create */ /* */ /* Author Stephanie Gerthoux */ /* */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE #ifndef __DAR_CONST_I_H_ #define __DAR_CONST_I_H_ #include "config/chipset.cfg" #ifdef __cplusplus extern "C" { #endif /* Define a mask used to identify the events */ #define DAR_EVENT_EXTERN (0x0C00) #define DAR_EVENT_INTERN (0x0300) /* The DAR task run without any time out */ #define DAR_NOT_TIME_OUT (0) /* The DAR entity processes only the messages send to the following mail box */ #define DAR_MBOX (RVF_TASK_MBOX_0) /* The DAR entity takes into account only the following events: */ #define DAR_TASK_MBOX_EVT_MASK (RVF_TASK_MBOX_0_EVT_MASK) /* The DAR entity waits all event type */ #define DAR_ALL_EVENT_FLAGS (0xFFFF) /* The DAR use max group elements used */ #define DAR_MAX_GROUP_NB (4) /* RAM max buffer size */ #define DAR_MAX_BUFFER_SIZE (3000) /* Recovery data max buffer size */ #define DAR_RECOVERY_DATA_MAX_BUFFER_SIZE (50) /* Dar invalid value */ #define DAR_INVALID_VALUE (0xFFFF) /* Dar initialization */ #define DAR_INITIALIZATION_VALUE (0x0000) /* Define the Watchdog timer register mode */ #define WATCHDOG_TIM_MODE (0xFFFFF804) #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11)) /* Define the Debug Unit register mode */ #define DAR_DEBUG_UNIT_REGISTER (0x03C00000) #elif (CHIPSET == 12) /* Define the Debug Unit register mode */ #define DAR_DEBUG_UNIT_REGISTER (0x09F00000) #endif /* Mask to enable the Debug Unit Module */ #define ENABLE_DU_MASK (0xF7FF) /* Mask to disable the Debug Unit Module */ #define DISABLE_DU_MASK (0x0800) /* Extra Control register CONF Adress */ #define DAR_DU_EXTRA_CONTROL_REG (0xFFFFFB10) /* Define the size of the Debug Unit register */ /* This size is 64 words of 32 bits = 64*4 bytes */ /* Size in bytes */ #define DEBUG_UNIT_BYTES_SIZE (256) /* Define the size in words */ #define DEBUG_UNIT_WORD_SIZE (64) /* Define the size of the X_dump _buffer */ /* This size is specified in the gsm_cs_amd4_lj3_test.cmd (in "system" directory) */ /* Its size is 38*32 bits = 38*4 bytes = 152 bytes */ #define DAR_X_DUMP_BUFFER_SIZE (152) /* Define the exceptions */ #define DAR_NO_ABORT_EXCEPTION (0) #define DAR_EXCEPTION_DATA_ABORT (1) #define DAR_EXCEPTION_PREFETCH_ABORT (2) #define DAR_EXCEPTION_UNDEFINED (3) #define DAR_EXCEPTION_SWI (4) #define DAR_EXCEPTION_RESERVED (5) #ifdef __cplusplus } #endif #endif /* __DAR_CONST_I_H_ */ #endif /* #ifdef RVM_DAR_SWE */