FreeCalypso > hg > fc-magnetite

view src/cs/services/atp/atp_config.h @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*******************************************************************************
 *
 * File Name : atp_config.h
 *
 * Configuration setting of ATP SW entity
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.1      Date : 28-Feb-2000
 *
 * History			: 0.1  - Created by E. Baissus
 *
 *
 * Author           : Eric Baissus : e-baissus@ti.com
 *
 *   (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved
 ******************************************************************************/
#ifndef ATP_CONFIG_H
#define ATP_CONFIG_H

#include "atp/atp_pool_size.h"	/* Stack & Memory Bank sizes definitions */

/* Maximum number of SW entity which can register simultaneously
   register to the ATP SW entity */
#define ATP_MAX_NB_SW_ENTITY 10 // This does not includes GSM SW entity 
#define ATP_SW_ENTITY_NAME_MAX_CARAC 10
#define ATP_SPP_MAX_PENDING_PORT 10 /* Maximum number of port which can be in open port 
									pending state at the same time
									Note that a port is considered to be in pending state when 
									in server mode */


#define ATP_HSG_NAME "HSG" /* Sw entity name : used to register to ATP the HSG*/
#define ATP_GSM_NAME "GSM" /* Sw entity name of the GSM-PS used to register to the ATP */
#define ATP_SPP_NAME "SPP" /* Sw entity name : used to register to ATP the SPP */
#define ATP_HS_NAME "HS" /* Sw entity name : used to register to ATP the HS */
#define ATP_AAA_NAME "AAA" /* Sw entity name of the GSM-PS used to register to the ATP */
#define ATP_DEFAULT_GSM_MAX_PACKET_SIZE (1500) // Default value indicating the maximum size that is supported
											   // when GSM sends a packet to ATP

#define ATP_MAX_NB_OF_PORT_SUPPORTED_BY_GSM (3)
#define ATP_MAX_CMD_LENGTH (0xFF) // Maximum length of a command handled by ATP 
 
/* Configuration parameters for environment */
#define ATP_MB_PRIM_SIZE      ATP_MB1_SIZE
#define ATP_MB_PRIM_WATERMARK (ATP_MB_PRIM_SIZE - 1000)

/*
** This def is in rvm_priorities.h
** #define		ATP_SWE_LEVEL		(4); // SHOULD BE DEFINED IN RVM_PRIORITIES.H !!!
*/

#endif