view src/cs/layer1/gtt_include/l1gtt_defty.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1GTT_DEFTY.H
 *
 *        Filename l1gtt_defty.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#ifndef _L1GTT_DEFTY_H_
#define _L1GTT_DEFTY_H_

#if (L1_GTT == 1)

  // GTT L1A/L1S COM structure
  //---------------------------

  typedef struct
  {
    BOOL  start;
    BOOL  stop;
  }
  T_GTT_COMMAND;

  typedef struct
  {
    UWORD8  scen_enable;
    UWORD16 rate;
  }
  T_GTT_TEST;

  typedef struct
  {
    T_GTT_TEST    test;
    T_GTT_COMMAND command;
  }
  T_GTT_TASK;

  // FIFO structure
  //----------------

    #if (CODE_VERSION == SIMULATION)

      // DSP address do not exist --> 32-bit addresses
      typedef struct
      {
        API *ptr_read;         //API pointer to current data to read
        API *ptr_write;        //API pointer to free area to write to
        API *buffer_start;     //pointer to start
        UWORD16 buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #else

      typedef struct
      {
        API ptr_read;         //API pointer to current data to read
        API ptr_write;        //API pointer to free area to write to
        API buffer_start;     //pointer to start
        API buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #endif

  // GTT test data
  //--------------

  typedef struct
  {
    UWORD16 scen_index;
    UWORD16 scen_length;
    char   *scen_ptr;
    UWORD8  chars_to_push;
    UWORD16 frame_count;
  }
  T_GTT_TEST_L1S;

#endif 


#endif //_L1GTT_DEFTY_H_