FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/timer/timer1.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************** TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer1.c Description : Set of useful functions for TIMER module test cases Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.4 Date and time : 08/18/00 14:42:35 Previous delta : 06/30/00 11:40:43 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.timer1.c Sccs Id (SID) : '@(#) timer1.c 1.4 08/18/00 14:42:35 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #include "memif/mem.h" #include "timer1.h" /*--------------------------------------------------------------*/ /* Dtimer1_Get_cntlreg() */ /*--------------------------------------------------------------*/ /* Parameters : none */ /* Return : none */ /* Functionality : read one of the TIMER register */ /*--------------------------------------------------------------*/ SYS_UWORD16 Dtimer1_Get_cntlreg(void) { volatile SYS_UWORD16 timerReg; timerReg = (( * (SYS_UWORD16 *) D_TIMER_CNTL) & D_TIMER_CNTL_MASK); return(timerReg); } /*--------------------------------------------------------------*/ /* Dtimer_Init_cntl() */ /*--------------------------------------------------------------*/ /* Parameters :start/stop,reload yes/no,pre scale,ext clk on/off*/ /* Return : none */ /* Functionality : initialize the timer start, autoreload, Ptv */ /* and clock enable */ /*--------------------------------------------------------------*/ void Dtimer1_Init_cntl (SYS_UWORD16 St, SYS_UWORD16 Reload, SYS_UWORD16 clockScale, SYS_UWORD16 clkon) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ~(D_TIMER_ST | D_TIMER_PTV); /* stop and reset values */ (Reload) ? (cntl |= D_TIMER_AR) : (cntl &= ~D_TIMER_AR); cntl |= (clockScale << 2 ); cntl |= ( clkon << 5 ); * (SYS_UWORD16 *) D_TIMER_LOAD = St; * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer1_AR() */ /*--------------------------------------------------------------*/ /* Parameters :start/stop,reload yes/no,pre scale,ext clk on/off*/ /* Return : none */ /* Functionality : set the AR bit Ar = 0 | 1 */ /*--------------------------------------------------------------*/ void Dtimer1_AR(SYS_UWORD16 Ar) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ~(D_TIMER_ST); /* stop the timer */ cntl &= ~(D_TIMER_AR); cntl |= ( Ar << 1 ); * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer1_PTV() */ /*--------------------------------------------------------------*/ /* Parameters : pre scale */ /* Return : none */ /* Functionality : set the Ptv bits Ptv = 0 => 7 */ /*--------------------------------------------------------------*/ void Dtimer1_PTV(SYS_UWORD16 Ptv) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ~(D_TIMER_ST); /* stop the timer */ cntl &= ~(D_TIMER_PTV); /* Ptv[4:0] set to 0 */ cntl |= ( Ptv << 2 ); * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer1_Clken() */ /*--------------------------------------------------------------*/ /* Parameters : ext clk on/off */ /* Return : none */ /* Functionality : set the clock_enable bit En = 0 | 1 */ /*--------------------------------------------------------------*/ void Dtimer1_Clken(SYS_UWORD16 En) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ( ~D_TIMER_CLK_EN); cntl |= ( En << 5 ); * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer_Start() */ /*--------------------------------------------------------------*/ /* Parameters : on/off */ /* Return : none */ /* Functionality : Start or stop the timer */ /*--------------------------------------------------------------*/ void Dtimer1_Start (SYS_UWORD16 startStop) { (startStop == D_TIMER_ST) ? ((* (SYS_UWORD16 *) D_TIMER_CNTL) |= D_TIMER_ST) : /* condition vrai */ ((* (SYS_UWORD16 *) D_TIMER_CNTL) &= ~D_TIMER_ST); /* condition fausse */ } /*--------------------------------------------------------------*/ /* Dtimer_ReadValue() */ /*--------------------------------------------------------------*/ /* Parameters : on/off */ /* Return : none */ /* Functionality : Read timer value */ /*--------------------------------------------------------------*/ SYS_UWORD16 Dtimer1_ReadValue (void) { return(* (SYS_UWORD16 *) D_TIMER_READ); } /*--------------------------------------------------------------*/ /* Parameters : on/off */ /* Return : none */ /* Functionality : Write timer value */ /*--------------------------------------------------------------*/ void Dtimer1_WriteValue (SYS_UWORD16 value) { (* (SYS_UWORD16 *) D_TIMER_LOAD) = value; }
