FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/timer/timer.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer.h Description : timer.c header Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.3 Date and time : 07/23/98 16:25:53 Previous delta : 07/23/98 16:25:52 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.h Sccs Id (SID) : '@(#) timer.h 1.3 07/23/98 16:25:53 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #define TIMER_CNTL_REG MEM_TIMER_ADDR /* watchdog Control Timer register */ #define TIMER_ST 0x0080 #define TIMER_AR 0x0100 #define TIMER_PTV 0x0e00 #define TIMER_CNTL_MASK 0x0f80 #define TIMER_MODE_MASK 0x80ff #define TIMER_LOAD_REG (MEM_TIMER_ADDR + 0x02) /* Timer load register */ #define TIMER_READ_REG (MEM_TIMER_ADDR + 0x02) /* Timer read register */ #define TIMER_MODE_REG (MEM_TIMER_ADDR + 0x04) /* Timer mode register */ #define TIMER_WDOG 0x8000 /* watch dog */ #define START_STOP 1 /*to start or stop a timer */ #define AR 0x0002 #define PTV 0x001c #define TIMER_CLK_EN 0x0020 #define TIMER1_CNTL (MEM_TIMER1 + 0x00) #define TIMER1_LOAD_TIM (MEM_TIMER1 + 0x02) #define TIMER1_READ_TIM (MEM_TIMER1 + 0x04) #define TIMER2_CNTL (MEM_TIMER2 + 0x00) #define TIMER2_LOAD_TIM (MEM_TIMER2 + 0x02) #define TIMER2_READ_TIM (MEM_TIMER2 + 0x04) /*-------------------------------------------------------------- * TIMER_START_STOP () *-------------------------------------------------------------- * Parameters : start or stop command * Return : none * Functionality : Start or Stop the timer *--------------------------------------------------------------*/ #define TIMER_START_STOP(startStop) ((startStop) ? ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) |= TIMER_ST) : \ ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) &= ~TIMER_ST)) /* Prototype of the functions */ void TM_ResetTimer (SYS_UWORD16 timerNum, SYS_UWORD16 countValue, SYS_UWORD16 autoReload, SYS_UWORD16 clockScale); void TM_StopTimer (int timerNum); void TM_StartTimer (int timerNum); SYS_UWORD16 TM_ReadTimer (int timerNum); void TM_DisableWatchdog(void); void TM_EnableWatchdog(void); void TM_ResetWatchdog(SYS_UWORD16 cnt); void TM_EnableTimer (int timerNum); void TM_DisableTimer (int timerNum); SYS_UWORD16 TIMER_Read (unsigned short); void TIMER_WriteValue (SYS_UWORD16); unsigned short TIMER_ReadValue (void);